FT10 series small horizontal float level switchDetailed product description：

FT10 series
Characteristics
☆ Adjustable switch point with LED display of flow status
The switch will not be damaged if the flow exceeds the specified range
☆ Two probe sizes, long and short, can be selected
The probe and cable with a shell level of NEMA4X have anti-corrosion properties
☆ Relay or FET switch output can reliably interface with PLC, SCADA or alarm systems
☆ Plastic casing made of PP/Ryton or PVDF material
performance
Set point range: 0.04-3fbs (0.06mps)
Factory set point: 0.2fbs (0.06mps)
Repeatability: within ± 5% of the set point
Setpoint drift: within ± 5% of the set point
Reaction time: 1-10 seconds
Viscosity range: 1-300 centipoise
Supply voltage: 12-36CDX
Power consumption: FET 50mA, Relay 70mA
FET switch parameters: 36VDC@100mA
RelayL output: 60CDX/ NAC@1A
FET output: 36VDC@100mA
Switch output: normally open, normally closed
Setpoint adjustment: potentiometer
Display: LED display
Liquid temperature range: 0-60 ℃
Pressure level: 150 psi (10 bar) at 25 degrees Celsius, with a decrease of 1.667 pdi (113 bar) per degree Celsius above 25 degrees Celsius
Probe grade: NEMA4X/IP65
Probe material: PP/PVDF
Installation thread: 3/4NPT (3/4G)
Cable specification: 8 feet (244cm), 3 wires, caliber 22gayge, with ground wire shielding and PP or PEA insulation outer sheath
C E certification: EN50082-2 immunity EN55011 emission