The TD-1 type hydraulic actuator stroke transmitter is paired with the TD-1 type hydraulic actuator stroke sensor for measuring the displacement of the turbine valve position. Built in excitation source and differential measurement circuit, convert the working condition, load size, and operating efficiency of the unit into 4-20mA current output, accurately measure and monitor the unit, and can be directly connected to the computer PLC、DCS、 The display instrument is connected.  

Technical specifications of TD-1 hydraulic engine stroke transmitter:

1. External power supply: ± 24VDC or 220VAC ± 10%
2. Input signal: Receive a signal from an LVDT linear differential transformer; Input impedance:>90K Ω
3. Range: 0-500 mm
4. Accuracy: ± 1% of full scale
5. Current output: 4-20 mA active; Output load: ≤ 500 Ω
6. Temperature range: -25 ℃ to+65 ℃ during operation; When stored at -40 ℃ to+85 ℃
7. Relative humidity: 90%, non solidifying
8. Physical indicators: external dimensions 110 × 165 × 65mm; installation dimensions 175mm

Order guide
The TD-1 hydraulic engine travel transmitter must be equipped with a TD-1 hydraulic engine sensor to form a system

Selection code: TD-1-A □□
Selection instructions:

Range A □□: 01-0~35mm; 02-0~50mm; 03-0~100mm
04——0～150mm； 05——0～200mm； 06——0～250mm； 07——0～300mm 
08——0～350mm； 09——0～400mm； 10——0～500mm； 11——0～600mm