YSZC-11 Integrated temperature transmitterDetailed product description：

The YSZC-11 integrated digital temperature transmitter is a field installed temperature transmitter unit used in conjunction with industrial thermocouples and thermistors. It adopts a two-wire transmission method (two wires serve as a common transmission line for power input and signal output). Convert industrial thermocouple and thermistor signals into 4-20mA output signals that are linear with the input signal or temperature signal.

This temperature transmitter can be directly installed in the junction box of thermocouples and thermal resistors to form an integrated structure. Directly measure the temperature of liquid, vapor, gas media, and solid surfaces within the range of -200 to 1800 ℃ in various production processes. As a new generation of temperature measuring instrument, it can be widely used in industrial sectors such as metallurgy, petroleum, chemical, power, light industry, textile, food, national defense, and scientific research.   

Features:
A high-precision cold end compensation circuit with a compensation accuracy of ± 0.5 ℃ across the entire temperature range;
A unique nonlinear correction circuit that outputs a signal that is linearly related to the measured temperature;
The internal drift self correction system ensures accuracy throughout the entire operating temperature range.

Technical parameters:
Basic error: ± 0.2% ± 0.5% ± 1%
The impact of environmental temperature changes:
For level 0.2: 0.02% F.S/℃
For level 0.5: 0.05% F.S/℃
For Level 1.0: 0.05% F.S/℃
Output: 4-24mADC, two-wire transmission
Supply voltage: 14-34VDC, rated voltage 24VDC
Load capacity: 0-500 Ω
Thermocouple cold end compensation error: within the working temperature range, less than 1 ℃
Working temperature range: -25 to+85 ℃
Storage temperature: -25 to+125 ℃
Relative humidity: 5-95%, no condensation
Power consumption:<0.5W

Model naming convention:

model	category	Temperature sensing element	install and fix	wiring	protect	Additional security	Instructions
		material	method	Box form	pipe diameter	Form of installation
YSZC-11							Temperature Instrument
	R						thermocouple
	Z						thermal resistor
		M					Nickel chromium silicon nickel chromium
		N					Nickel chromium nickel silicon
		E					Nickel chromium copper nickel
		F					Iron copper nickel
		C					Copper Copper Nickel
		P					platinum
		C					copper
			one				No fixed device
			two				Fixed thread
			three				Flange
			four				Fixed flange
			five				Fixed thread cone form
				two			Anti spray type
				three			waterproof type
				four			Explosion proof type
					0		Ф16
					one		Ф12
					two		Ø 16 high alumina pipe
					three		Ø 20 high alumina pipe
						Nothing	Normal installation
						Z	Separate installation

Installation dimensions:

Fixed thread		d	M		H	S	D。		Nominal Pressure
		Φ12 Φ16	M27*2		thirty-two	thirty-two	Φ40		ten
Flange		d	D2		D1		d0		Nominal Pressure
		Φ12 Φ16 Φ20	Φ70		Φ54		Φ6		atmospheric pressure
Fixed flange		dD2	D2	D1	D0	d0	H	h	Nominal Pressure
		Φ12 Φ16 Φ20	Φ95	Φ65	Φ45	Φ14	nineteen	three	six point four
Fixed thread conical protective tube		d	M		h	s	D0		Nominal Pressure
		taper	M33*2		thirty-two	thirty-six	Φ48		thirty

Boundary dimensions of junction box: