NYB-1015 Mud pump specific pressure transmitterDetailed product description：

Product Introduction

The NYB-1015 pressure transmitter is specially designed and manufactured to solve the harsh environment of drilling and logging in oil fields, such as mud blockage of pressure holes and strong vibration. The transmitter adopts a sputtering thin film pressure sensor as the sensitive element, which is integrated with the electronic circuit to output a 4-20mA standard signal. This model of pressure transmitter has a fully stainless steel cylindrical structure, which is easy to use. Especially suitable for industrial sites such as oilfield logging, pharmaceuticals, textiles, etc. where viscosity is prone to blockage and strong vibration. And it has achieved good application results in domestic oil fields.
High pressure resistance, high temperature resistance, and long-term stability can be guaranteed within ± 0.1% FS
Anti vibration, impact, and corrosion-resistant all stainless steel anti blocking structure design
The sensor is directly installed, and the measuring element comes into direct contact with the measured medium without the need for additional isolation, which improves measurement accuracy and is less affected by temperature

Application scope:
Mud slurry, coal slurry, crude oil and other viscous media
Hydraulic, building, constant pressure water supply
Oil extraction, monitoring, and control system
Steam and pharmaceutical engineering

Technical specifications of NYB-1015 mud pump specific pressure transmitter product

Main technical indicators, unit performance indicators
The tested medium includes viscous media such as liquid, mud slurry, coal slurry, etc
Power supply V 24V DC
Output mv/v 4~20mA or 1~5V
Range 0-150 MPa
Accuracy (nonlinearity, hysteresis, repeatability)% FS ± 0.1, ± 0.25 ± 0.5
Temperature effect on zero point% FS/℃± 0.01
Temperature affects sensitivity% FS/℃± 0.02
Output impedance K Ω 3 ± 0.5
Insulation resistance M Ω≥ 1000
Working temperature range ℃ -40~+125
Allow overload% FS 120
Connection method 1/2G or 1/2NPT
Liquid receiving material diaphragm 17-4PH process connector 1Cr18Ni9Ti
Relative humidity RH 0-90%