SCC131 series pressure transmitterDetailed product description：

Product Introduction

The SCC131 series pressure transmitter is used to measure the relative pressure of gases, liquids, and vapors. It is mainly used in the chemical, pharmaceutical, and food industries, as well as in the fields of mechanical engineering, shipbuilding, water supply, and resource conservation.

design
The transmitter SCC131 can be composed of different sensors and matching electronic amplifier boards according to user needs, and is installed together in a stainless steel housing. The transmitter is equipped with a stainless steel process connector.

Overview
The SCC131 series pressure transmitter is a type of pressure transmitter that can accurately calibrate its zero and full-scale outputs. Multiple sensors can be selected to meet the needs of different users.

Technical specifications of SCC131 pressure transmitter product

Measurement range: -0.1... 0-0.01... 60MPa
Pressure type: gauge pressure or absolute pressure
Working temperature: -20~85 ℃
Storage temperature: -40~120 ℃
Power supply: 15-30VDC
Output signal: 4-20mADC
Transmission method: two-wire system
Load resistance: ≤ (U-15)/0.02 Ω
Accuracy: Typical:+0.2% FS;
Long term stability: Typical:+0.1% FS;
Maximum:+0.5% FS (including nonlinear hysteresis and repeatability) Maximum:+0.2% FS
Zero temperature drift: 0.03% FS/℃ (≤ 100kPa);
0.02%FS/℃（＞100kPa）
Full temperature drift: 0.03% FS/℃ (≤ 100kPa)
0.02%FS/℃（＞100kPa）

SCC131 Pressure Transmitter Selection Specification Table
SCC131	Absolute pressure/pressure transmitter
	code		Types of Stress
	A		Absolute pressure type
	G		Gauge pressure
		code		measurement range						precision
				Minimum measurement range			Maximum measurement range
		01		0~3kPa			0~10 kPa			+0.2%
		02		0~10 kPa			0~35 kPa			+0.2%
		03		0~35 kPa			0~100 kPa			+0.2%
		04		0~100 kPa			0~200 kPa			+0.2%
		05		0~200 kPa			0~700 kPa			+0.2%
		06		0~700kPa			0~2 MPa			+0.2%
		07		0~2 MPa			0~3.5 MPa			+0.2%
		08		0~3.5 MPa			0~7.0 MPa			+0.2%
		09		0~7.0 MPa			0~30 MPa			+0.2%
		ten		0~30 MPa			0~60 MPa			+0.2%
				code	output signal
				E	Analog 4-20mA DC
				S	Intelligent 4-20 mA DC HART protocol digital communication
					code	sensor type
					D	Ceramic capacitive sensor
					Y	Ceramic resistance sensor
					K	Diffused silicon sensor
					Q	Other forms of sensors
						code		process interface
						P1		M20 × 1.5 external thread
						P2		1/2 NPT external thread
						P3		G1 external thread (large opening)
						PX		User-defined
								code	Additional features
								N	Nothing
								M1	Simulated indicator header
								M4	Digital display header
								Fa	Intrinsic safety Ex ia Ⅱ CT5
								Da	Explosion proof Ex ds Ⅱ BT5
								H	high-temperature type
								C	Sanitary type