JK1151 Capacitive pressure transmitterDetailed product description：

One Product Overview

The JK1151 series capacitive pressure/differential pressure transmitter is an advanced manufacturing process and equipment that our company has adopted from similar products at home and abroad. It has novel design principles, complete varieties and specifications, easy installation and use, intrinsic safety and explosion-proof characteristics Especially with high precision, small size, light weight, sturdy and vibration resistant, easy adjustment, and a series of products supplied to domestic and foreign users at favorable prices. According to the variety, it can be divided into differential pressure transmitters, high static pressure transmitters, absolute pressure transmitters, pressure transmitters, flange level transmitters, and remote pressure/differential pressure transmitters. Suitable for process control and measurement in fields such as petroleum, chemical, metallurgical, papermaking, textile, pharmaceutical, and power.

Technical specifications of JK1151 capacitive transmitter product

II Main Features

The variety is complete Can be exchanged with similar products of 1151
High precision Good stability
Solid structure, impact resistant Anti vibration
Explosion proof shell structure 24/7 use
Continuous external adjustment of range and zero position
Positive migration can reach 500% Negative transfer can reach 600%
adjustable damping

4 Location impact
Possible zero position system error not exceeding 0.24KPa may occur, which can be eliminated by adjusting the zero position without affecting the measurement range

Five Power supply impact
Less than ± 0.005%/V of the output range

VI Positive and negative migration
Differential pressure transmitter; The maximum positive migration amount is 500%, and the maximum negative migration amount is 600%
Pressure transmitter; The maximum positive migration is 500%, and the maximum negative migration is not greater than atmospheric pressure
Absolute pressure transmitter; Only positive migration is allowed, with a maximum positive migration of 500%

7 Overload pressure
Not exceeding 1.15 times the maximum working pressure, the transmitter will not be damaged

8 structural material
The materials of parts in contact with the medium, such as pressure chambers, joints, relief valves, isolation diaphragms, etc., are listed in the "Selection Specification Table" for each model
Contact medium "O" ring; Nitrile rubber, fluororubber
Infusion of semen; Silicone oil or inert oil
Bolt; Carbon steel coated with zinc
Electrical casing; Low copper aluminum alloy

Nine JK1151 Capacitive Pressure Transmitter Shell Protection
Better than IP65

Ten working voltage
12--45VDC, The digital display with LCD is 15-45VDC, usually 24VDC

Eleven output signal
Standard 4-20mADC
Can provide 0-10mADC, 1-5VDC, 4-20mA square root

Twelve Explosion proof characteristics
Intrinsic safety type; Ia Ⅱ CT6 should be equipped with external safety barriers
Explosion proof type; dⅡBT4