MV-2000T Intelligent pressure transmitterDetailed product description：

Product Introduction

In industrial process control systems, pressure/differential pressure transmitters are commonly used measuring instruments, suitable for almost all factories, and are commonly used to measure key process parameters. Therefore, users' requirements for this device are constantly increasing.

1. Close the valve and multi valve group:
2. Drain/exhaust valve;
3. Remote transmission membrane box;
4. An orifice plate directly fixed to the transmitter for small flow measurement;
5. Install the bracket.

Technical specifications of MV 2000T intelligent pressure transmitter product

1. The composite sensor measurement room enables one instrument to obtain multiple parameters, greatly simplifying design, assembly, and operation;
2. Extremely high measurement accuracy: optional 0.075% or 0.05%;
3. Wide range ratio: 100:1;
4. Wide range: 50Pa~60MPa;
5. High stability and reliability: long-term drift of 0.05%/year, MTBF exceeding 200 years;
6. 5-year maintenance free, saving maintenance costs;
7. The influence of temperature and static pressure is minimal and can be ignored;
8. Excellent unidirectional overvoltage characteristics;
9. High static pressure: 16MPa, 25MPa, 40MPa;
10. Wide temperature range: the environment is -40~85 ° C, and the measured medium is -50~400 ° C;
11. Equipped with a backlit LCD display that can be configured with local buttons;
12. Replacing electronic components can be self configured;
13. The measuring membrane in the basic model is made of Hastelloy C;
14. The process flange and clamping screws in the basic model are made of stainless steel;
15. Output signal: 4-20 mA/HART

1. The composite sensor measurement room enables one instrument to obtain multiple parameters, greatly simplifying design, assembly, and operation;
2. Extremely high measurement accuracy: optional 0.075% or 0.05%;
3. Wide range ratio: 100:1;
4. Wide range: 50Pa~60MPa;
5. High stability and reliability: long-term drift of 0.05%/year, MTBF exceeding 200 years;
6. 5-year maintenance free, saving maintenance costs;
7. The influence of temperature and static pressure is minimal and can be ignored;
8. Excellent unidirectional overvoltage characteristics;
9. High static pressure: 16MPa, 25MPa, 40MPa;
10. Wide temperature range: the environment is -40~85 ° C, and the measured medium is -50~400 ° C;
11. Equipped with a backlit LCD display that can be configured with local buttons;
12. Replacing electronic components can be self configured;
13. The measuring membrane in the basic model is made of Hastelloy C;
14. The process flange and clamping screws in the basic model are made of stainless steel;
15. Output signal: 4-20 mA/HART