DW168 Industrial grade micro pressure transmitterDetailed product description：

Product Introduction

DW168 is an industrial grade transmitter with a long lifespan, which is twice that of ordinary products. The improvement of service life comes from the enhancement of the protection performance of internal sensors against moisture, water, dust, overload, temperature drift, and other factors.

The DW168 is less affected by dynamic pressure during micro pressure measurement, and the optional low-power/wide temperature range LCD display is another feature of the DW168.
Can measure damp, turbid gases, and even liquids
Equipped with damping filter, less affected by dynamic pressure
The same transmitter is commonly used for measuring differential pressure, pressure, and negative pressure
Can provide positive/negative pressure composite range, with zero point in the middle
Low power/wide temperature range LCD display table
High overload and high static pressure
Outdoor installation, IP65 protection

DW168 industrial grade micro pressure transmitter

Pressure>: minimum 0 100Pa, maximum 0 700KPa	temperature drift	0.03% F.S/℃ when the range is less than 5KPa
Differential pressure: minimum 0 100Pa, maximum 0 700KPa		0.1% F.S/℃ when the range is ≥ 5KPa
Negative pressure: minimum 0 100Pa to 0, maximum 0 100KPa to 0	long-term stability	When the range is less than 5KPa, 0.8% F.S/year
Absolute pressure: minimum 0 35KPa, maximum 0 200KPa		0.2% F.S/year when the range is ≥ 5KPa
Positive and Negative Pressure Composite: Minimum -100Pa to 0 to 100Pa	Overload and static pressure		Unidirectional overload	static pressure
Maximum -100KPa to 0 to 100KPa		When the range is ≤ 50KPa	100KPa	200KPa
Operating Temperature		Sensor: -20~85 ℃	When the range is greater than 50KPa	3 times full scale	5 times full scale
		Circuit: -40-85 ℃	When the range is greater than 300KPa	850KPa	850KPa
	LCD display: -10~70 ℃	Accuracy (linear, repetitive) Total of sex and delay
Zero and range adjustment range: ± 15%		Typical 0.15% and maximum 0.5% when the range is less than 5KPa
liquid crystal display	3 1/2 bit LCD, display accuracy 0.2%, display unit optional, font height 12mm, voltage drop 5V	Typical 0.1% and maximum 0.25% when the range is ≥ 5KPa
Applicable Medium	Non corrosive gases and liquids	shell protection	IP65
Pressure interface	M10 × 1 internal thread or ￠ 8 barbed interface	power supply	15～36V DC
		output	4～20mA