LD3051J Micro differential pressure transmitterDetailed product description：

Product Introduction

The LD3051J micro differential pressure transmitter is used to measure the liquid level, density, and pressure of liquids, gases, or vapors, and then convert it into a 4-20mADC current signal output.

Can LD3051 also be used with portable computers, DCS, and HART? 275 handheld devices communicate with each other and perform settings and monitoring through them.

Technical specifications of LD3051J micro differential pressure transmitter product

Environmental temperature impact	± (0.05% URL+0.1% range)/20 ℃
Static pressure influence	± 0.05% URL when static pressure ranges from 0 to 500 psi (0 to 3.4 MPa)
Range error	±0.1%/500psi (3.4MPa)
Installation location impact	Zero drift up to 0.25Kpa, can be corrected, no range impact
Power supply impact	0.005% calibrated range/volt
Electromagnetic interference impact	Complies with IEC standard 801
Power supply	External power supply is required Standard transmitter (4~20mA) operates at 10~45VDC when unloaded
Humidity limit	0-100% relative temperature
Process temperature	-40 to 2190F (-40 to 104 ℃)
Temperature limit	-40 to 1850F (-40 to 85 ℃) Integrated header: -20 to 1850F (-29 to 80 ℃)
sealing grade	IP67 waterproof rating (equivalent to NEMA4X and IECLP67)
Startup time	The transmitter reaches its performance indicators within 3 seconds of being powered on
Volume change amount	Less than 0.01in3 (0.15cm3)
weight	3.15Kg (without installation bracket and process connector)