JH1151HP High static pressure transmitterDetailed product description：

The JH1151HP high static pressure differential pressure transmitter not only has the characteristics of a DP type differential pressure transmitter, but also has the ability to withstand a working pressure of 32MPa and overload protection, ensuring reliable application of the product in high static pressure systems.

Target audience: liquids, gases, and vapors.  

Technical specifications of JH1151HP high static pressure transmitter product
Measurement range

Differential pressure: 0-1.3~6890KPa
Static pressure: 25, 32MPa

Selection method

JK1151HP	High static pressure differential pressure transmitter
	code	Range KPa
	three	0-1.3～7.5
	four	0-6.2～37.4
	five	0-31.1～186.8
	six	0-117～690
	seven	0-345～2068
		code	output
		E	4-20mADC
		S	Intelligent
			code name	structural material
				Flanges and fittings		Exhaust/Drain Valve	Isolation membrane	Fill with liquid
			twenty-two	316 Stainless Steel		316 Stainless Steel	316 Stainless Steel	silicone oil
			twenty-three	316 Stainless Steel		316 Stainless Steel	Hastelloy C
			twenty-four	316 Stainless Steel		316 Stainless Steel	Monel
			twenty-five	316 Stainless Steel		316 Stainless Steel	Tantalum
			thirty-three	Hastelloy C		Hastelloy C	Hastelloy C
			thirty-five	Hastelloy C		Hastelloy C	Tantalum
			forty-four	Monel		Monel	Monel
				code name	Maximum working pressure MPa
				E-	twenty-five
				F-	thirty-two
					code	option
					M1	0-100% linear indicator table
					M3	3 and a half digit LCD display table
					M4	Smart meter display
					B1	Pipe bending bracket
					B2	Board mounted bending bracket
					B3	Pipe mounted flat bracket
					D1	The side relief valve is located at the upper part of the pressure chamber
					D2	The side relief valve is located at the lower part of the pressure chamber
					No note	1/2NPT taper pipe threaded joint
					C2	T-shaped threaded joint M20 × 1.5, with a ball cone connector welded with a rear end of a Ø 14 pressure pipe
					d	Explosion proof type d Ⅱ BT4
					i	Intrinsic safety type ia Ⅱ CT6
					J	Flow transmitter 4-20mA square root output
					s	Stainless steel three valve group