TH100 series temperature and humidity transmitterDetailed product description：

Product Introduction

The TH100 series relative humidity/temperature transmitter developed and produced by KIMO company is specifically designed to measure the relative humidity of air and inert gases. The transmitter converts the sensor signal into a current or voltage signal. This voltage or current signal can be output to displays, recorders, controllers, building management systems, and data systems. TH series products are equipped with calibration certificates.
Transmitter output: 0-10V is a three wire system; 4-20mA is a two-wire system

TH100 series temperature and humidity transmitter

Product Technical Specifications

Technical parameters:
Range: Humidity: 0~100% RH
Temperature: -50~50 ℃; -20~80℃； 0~50℃； 0~100℃ 
Output: 0~10V output sensor
Power supply: 24VAC/VDC (3-4 wires) or 4-20mA output
Interface: Backbone
Protection level: IP 65
Display: Can display humidity and temperature
Installation method: Wall mounted

Characteristics:
humidity
Working principle: Temperature and humidity can be measured using CMOS, which includes capacitors and thermoregulators. This technology ensures
Prove long-term stability, measurement will be very accurate
Range: 0-100% RH
Measurement unit:% RH
Reaction time: 1/e (63%) 4s
Liquid types: air and neutral gases

temperature
Range: 0~+50 ℃, -20~+80 ℃, -50~+50 ℃, 0~+100 ℃
Measurement units: Fahrenheit, Celsius
Accuracy: ± 1% ± 0.4 ℃ of reading within the range of 5~80 ℃
Reaction time: 1/e (63%) 4s
Liquid types: air and neutral gases

Appearance:
Material: ABS
Fire rating: HB per UR94
Protection level: IP65
Display: 5-digit LCD Volume 50 * 15mm
temperature and humidity
Digital height: 10mm
Wire handle: maximum diameter 7mm
Weight: 145g (displayed); 110g (not displayed)