THTB Wall mounted temperature and humidity transmitterDetailed product description：

Product Introduction

The THTB wall mounted temperature and humidity transmitter is a common type of temperature and humidity transmitter that uses Switzerland's advanced CMOS digital temperature and humidity sensor. The relative humidity and temperature sensors have digital output, no debugging, no calibration, no peripheral circuits, and the sensors are fully interchangeable. Without the need for complex calibration and calibration processes, it excels in measurement accuracy, linearity, repeatability, interchangeability, consistency, and other aspects.

THTB wall mounted temperature and humidity transmitter

Product Technical Specifications
Technical Specifications
1. Humidity
Measurement range 0-100% RH
Measurement accuracy 2% RH or 3% RH
Working range 10-90% RH
2. Temperature
Measurement range -20-70 ℃
Measurement accuracy of 0.5 ℃
Work scope -20~70 * 0
3. Measure the medium without corrosive gases
4. Storage temperature -20 ℃ -85 ℃
5. Reaction time 8sec
6. Shell material ABS
7. Protection level IP21
8. Installation method: Wall mounted
Electrical Characteristics
1. Humidity output is shown in the selection table
2. Temperature output is shown in the selection table
3. Allowable load greater than 500K Ω or less than 500 Ω
4. Power supply voltage 24VDC.220VAC

THT	Install form	Precision	output form	power supply	Protect shell	transmitter
	B					wall-mounted
		01				2% accuracy
		02				3% accuracy
			A			4~20mA
			B			0~10VDC
			C			0~5VDC
			D			1~5VDC
			E			0~1VDC
				one		24VDC
					A	ABS plastic shell
					B	Cast aluminum shell