THTG Duct installation type temperature and humidity transmitterDetailed product description：

Product Introduction

The THTG pipeline installation type temperature and humidity transmitter is a common temperature and humidity transmitter that uses Switzerland's advanced CMOS type digital temperature and humidity sensor. The relative humidity and temperature sensors have digital output, no debugging, no calibration, no peripheral circuits, and the sensors are completely interchangeable. Without the need for complex calibration and calibration processes, it excels in measurement accuracy, linearity, repeatability, interchangeability, consistency, and other aspects.

THTG duct installation type temperature and humidity transmitter

Product Technical Specifications
Technical Specifications
1. Humidity
Measurement range 0-100% RH
Measurement accuracy 2% RH or 3% RH
Working range 10-90% RH
2. Temperature
Measurement range -40-120 ℃
Measurement accuracy of 0.5 ℃
Working range -20~70 ℃
3. Measure the medium without corrosive gases
4. Storage temperature -20 ℃~85 ℃
5. Reaction time less than 8 seconds
6. Probe length is optional
7. Probe protection tube material: stainless steel
8. Installation method: Pipeline installation, wall mounting
9. Shell material ABS
10. Protection level IP54
Electrical Characteristics
1. Humidity output is shown in the selection table
2. Temperature output is shown in the selection table
3. Allowable load greater than 500K~or less than 500Q
4. Power supply voltage 24VDC, 220VAC

THT	Install form	Precision	output form	power supply	Protect shell	Temperature and humidity transmitter
	F					Split wall hanging type
	Z					Direct pipeline installation
		01				2% accuracy
		02				3% accuracy
			A			4~20mA
			B			0~10VDC
			C			0~5VDC
			D			1~5VDC
			E			0~1VDC
				one		24VDC
				two		220VAC
					A	ABS plastic shell
					B	Cast aluminum shell