PT-9304B/PT-9305B/PT-9306B Pressure transmitterDetailed product description：

PT-9304B/PT-9305B/PT-9306B pressure transmitter

One Application:
The PT... series pressure transmitter is suitable for measuring the pressure of media such as air, water, ammonia, steam, as well as corrosive media compatible with 316 stainless steel Widely used in HVAC, medical and health, and industrial fields The PT... series pressure transmitter adopts an imported diffusion silicon sensor, which amplifies and linearizes the signal, and outputs a proportional DC 4mA~20mA signal according to a certain pressure measurement range Absolute pressure transmitters can be used to measure vacuum and negative pressure Integrated structure, lightweight stainless steel shell, easy to install on site, with optional connection interfaces of 7/16 "20UNF or M20 × 1.5
II Typical applications are as follows:
Computer room air conditioning system
Industrial refrigeration equipment
Air compressor control device
Medical, health, and food supply equipment
Hydraulic system and flow control system

III Features:
316 stainless steel isolation diaphragm, all stainless steel shell, strong corrosion resistance; Imported diffused silicon diaphragm sensor with good stability; Two line straight 4mA~20mA output signal; Low power consumption, small error, and good repeatability; Anti interference and polarity protection design, high reliability; Lightweight and compact, can be installed in any position; Standard connection interfaces can be selected; Cables can be configured according to user needs

3、 Technical parameters:
Measurement range Absolute pressure: (0-25/1600) kPa Gauge pressure: (0-100/6000) kPa
Output signal 4mA~20mA
Power supply voltage 24V DC*
Accuracy ± 0.5% FS, ± 1.5% FS (FS<50kPa) IEC 770
Temperature drift 0.02/℃ (Z+S)
Overpressure 2 times rated pressure 2 x FS
Destructive pressure 4 x FS
Working temperature: 0~50 ℃
Two core shielded PVC cable for electrical connection
Installation interface 7/16 "20UNF or M20 × 1.5 optional**
Materials: Stainless steel AISI 316L, AISI 304
The relative humidity of the environment is less than 90%; non-condensing
Protection level Absolute pressure: IP65 Gauge pressure: IP54

III Order model:
PT-8301D PT-8303B PT-8304B PT-8305B PT-8307B PT-8308B PT-9301B PT-9302B PT-9303B PT-9304B PT-9305B PT-9306B PT-9307B PT-9308B PT-9309B

Warning: Disconnect the power supply before wiring to avoid voltage shock or damage to the equipment
Attention: When measuring steam or other high or low temperature media, pressure pipes or other cooling or heating devices should be used to maintain the temperature within the range of the transmitter's operating temperature