UHM-Q type flap control liquid level gaugeDetailed product description：

Product Introduction

The UHZ-Q flap control level gauge is a new generation level control device designed based on the national utility model patent (ZL93237921,4). It is composed of integrated components such as flip plate indicator and position type magnetic control sensor. The display components and sensing elements do not come into contact with liquids, completely overcoming the drawbacks of old-fashioned sensing probes being corroded and malfunctioning. This product is safe and reliable, with clear display, stable performance, and durability.

This product is suitable for various types of pressure vessel equipment, dyeing equipment, and cleaning equipment. It has liquid level display and position based magnetic control functions, and its sensing signals are connected to relays and electrical control systems to meet the design and working requirements of automatic pump on/off and upper/lower limit alarms.

UHZ-Q type UHM-Q type flap control liquid level gauge

Product Technical Specifications
Flip board indicator
Measurement range: 0.2-6m 0.2-10m
Instruction
Accuracy: ± 5.0mm
Material: 1Cr18Ni9Ti stainless steel (or plastic)
Medium temperature: -40 ℃ -220 ℃
Environmental temperature: ≤ 90 ℃
Maximum working pressure: ≤ 2.5MPa
Medium density: ≥ 0.5g/cm3
Connection method: flat flange or other methods
Discharge valve: 1/2 "stainless steel ball valve
Positional magnetic control sensor
Control distance: made according to requirements
Output control signal set point: Two point or four point normally open signal (or normally closed signal as required).
Connection method: three wire or five wire system
Measurement voltage:<50VDC