UHS-E glass tube level gaugeDetailed product description：

UHS-E glass tube level gauge is an on-site direct reading liquid level measuring instrument, mainly used to directly indicate the liquid level height of various tanks, towers, tanks, boxes and other containers in various industrial fields.

Principle
The instrument is equipped with flanges or threaded joints on both the upper and lower valves, which are connected to the container to form a connector. The height of the liquid level in the container can be directly read through the glass tube.
The instrument is equipped with steel balls inside both the upper and lower valves. When the glass tube is damaged due to an accident, the steel balls will block the channel under the pressure inside the container, so that the container will automatically seal and prevent the liquid inside the container from continuing to flow out.
A drain valve can be installed at the lower valve end of the instrument, which can be used for sampling or for releasing residual liquid from the instrument during maintenance.

Selection of UHS-E Glass Tube Liquid Level Gauge

UHS-E-	A	HG20592-09 protruding flange
	B	HG20592-09 convex flange
	C	ANSI B16.5 protruding flange
		G	Glass tube level gauge
			□	Nominal pressure MPa
				I	Carbon steel material
				II	stainless steel material
					□	Ordinary type (not labeled)
					W	Thermal insulation type
						□□□□	Nominal length
UHS-E-	□	□	□	□	□	□□□□
UHS-E-AG1.6-IW-500 UHS-E glass tube level gauge, protruding flange, carbon steel with insulation, pressure of 1.6MPa, center distance of 500mm.