1151GP type pressure transmitterDetailed product description：

The 1151GP capacitive pressure transmitter (gauge pressure) measures a minimum pressure of 1kPa and is used for liquids, gases, and vapors.

1151GP type	Pressure transmitter (including negative pressure)
	two	0-0.1～1KPa
	three	0-1～6KPa
	four	0-6～40KPa
	five	0-40～200KPa
	six	0-0.16～1MPa
	seven	0-0.4～2.5MPa
	eight	0-1.6～10MPa
	nine	0-4～25MPa
	0	0-6～40MPa
		code name	function
		E	Ordinary analog type (output: 4-20mA)
		G	Conventional intelligent type (output: 4-20mA)
		S	Standard intelligent type (output: 4-20mA with HART bus protocol)
			generation number			Structural materials		material
				Flange joint		Exhaust/Drain Valve		Isolation membrane	Fill with liquid
			twenty-two	316 Stainless Steel		316 Stainless Steel		316 Stainless Steel	silicon oil
			twenty-three	316 Stainless Steel		316 Stainless Steel		Ha Shi C-276
			twenty-four	316 Stainless Steel		316 Stainless Steel		Monel
			twenty-five	316 Stainless Steel		316 Stainless Steel		Tantalum
				code name	Precision
				Q1	0.2%FS
				Q2	0.5%FS
						code name	Electrical connector
						L1	M20X1.5 internal thread
						L2	1/2NPT internal thread
								code name	Additional options
								M1	0-100% linear indicator head
								M3	Digital display header
								B1	2 "pipe bending bracket
								B2	Wall mounted/board mounted bending bracket
								B3	2 "pipe mounted flat bracket
								D0	The relief valve is located in the middle of the pressure chamber
								D1	The side relief valve is located at the upper part of the pressure chamber
								D2	The side relief valve is located at the lower part of the pressure chamber
								C0	1/2 "taper pipe internal thread joint
								C1	1/2 "pressure joint and rear welded pressure pipe with a diameter of 14 (including C0 when supplied)
								C2	T-shaped threaded joint M20X1.5
								d	Explosion proof EXd Ⅱ CT5
								I	Intrinsic safety type EXia Ⅱ CT6
1151GP        8          G         22             Q1         L1          M3B1D0C1