SWP-T200 series flange diaphragm pressure transmitterDetailed product description：

SWP-T203, SWP-T213, SWP-T223 flange diaphragm pressure transmitters

The SWP-T200 series flange diaphragm pressure transmitter adopts a flat flange process connection, and the isolation diaphragm can be extended to adapt to different measurement conditions.
This product has adaptability and can be used for pressure measurement in various highly corrosive, high viscosity, medium, and other easily clogged situations. General technical performance and basic SWPT20
Similarly, type "i" is intrinsically safe and type "d" is explosion-proof.

SWP-T200 series flange diaphragm pressure transmitter measurement range

Relative pressure maximum 0.0~40.0Mpa minimum 0.0~10.0Kpa
Maximum relative pressure -0.1~+2.4Mpa Minimum -5.0~+5.0Kpa
Relative pressure maximum 0.0~40.0Mpa minimum 0.0~10.0Kpa

external structure

process connection

Flat flange or extended flange
Flange standards: DN50, DN80, GB9123-88
Extension length: 0mm, 50mm, 100mm, 150mm, 200mm, PN4MPa~40MPa

Nominal diameter DN	Total height A	Diaphragm diameter dM	Convex diameter d2	Diameter of hole center circle K	Flange diameter d1	Aperture g2	Flange thickness X
fifty	one hundred and seventy-one	forty-six	ninety-nine	one hundred and twenty-five	one hundred and sixty-five	4×φ18	twenty
eighty	one hundred and seventy-five	seventy	one hundred and thirty-two	one hundred and sixty	two hundred	8×φ18	twenty-four

*Flange connection standards above 4Mpa will be provided separately according to user requirements.

temperature effect

DN50 300Pa/10K DN80 200Pa/10K
DN50 extends 50mm 300Pa/10K DN80 extends 50mm 200Pa/10K
DN50 extends 100mm 300Pa/10K DN80 extends 100mm 200Pa/10K
DN50 extends 150mm 300Pa/10K DN80 extends 150mm 200Pa/10K
DN50 extends 200mm 300Pa/10K DN80 extends 200mm 200Pa/10K

SWP-T203, SWP-T213, SWP-T223 flange diaphragm pressure transmitter model content

model	code										explanation
SWP-T203	□	□	□	□	□	□	□	□	□	□
Diaphragm Material	one										Stainless Steel 316L
	three										Stainless steel 1Gr18Ni9Ti
	four										Hastelloy C
	five										Tantalum
	seven										Stainless steel 316L coated with PTFE
	nine										Special requirements
Flange material	one										Stainless Steel 316L
	three										Stainless steel 1Gr18Ni9Ti
	nine										Special requirements
Process Connection Standard	B										Flange GB9123-88, DN50, PN4MPa
	B1										Flange GB9123-88, DN50, PN4MPa, extension 50
	B2										Flange GB9123-88, DN50, PN4MPa, extension 100
	B3										Flange GB9123-88, DN50, PN4MPa, extension 150
	B4										Flange GB9123-88, DN50, PN4MPa, extension 200
	C										Flange GB9123-88, DN80, PN4MPa
	C1										Flange GB9123-88, DN80, PN4MPa, extension 50
	C2										Flange GB9123-88, DN80, PN4MPa, extension 100
	C3										Flange GB9123-88, DN80, PN4MPa, extension 150
	C4										Flange GB9123-88, DN80, PN4MPa, extension 200
	Y										Special requirements
Intermediary fluid	A										Silicone oil (-40 ℃~130 ℃)
	E										Glycerol (-10 ℃~150 ℃)
	G										High temperature oil
	Y										Special requirements
Signal output mode	two										4-20mA second-line
	three										0-20mA second-line
	nine										Special requirements
Shell type	A										Aluminum shell without on-site indication, protection level IP65
	B										Aluminum shell with digital on-site indication, protection level IP65
	C										Aluminum shell with simulated on-site indication, protection level IP65
	S										plastic casing
	Y										Special requirements
accuracy class	two										zero point two
	five										zero point five
	nine										Special requirements
measurement range											Refer to the standard range table
	Y										Non standard range
sensor type											Ceramic capacitor type
	R										piezoresistive
capillary length	m										Limited to T223 type only