SD/SA Series Split type Ultrasonic Level GaugeDetailed product description：

The SD/SA series split type ultrasonic level gauge uses DC24V or AC220V power supply. When using DC24V power supply, a 3-core cable can be used, and the negative end of the power supply and the signal line share the same cable When using AC220V power supply, a 4-core cable should be used to separate the signal and power input This instrument is only used for storage tanks, chemical tanks, material tanks, water channels, water wells, etc The tested medium is: clean water, sewage, mortar, mud, acid-base solution, chemical reagents, lubricating oil, heavy oil, asphalt

Technical specifications:
Model: YW-SD, YW-SA
Measurement range: 4, 6, 8, 10, 15, 20, 30 meters with corresponding probe models: LU-4/6/8/10/15/20/30
Accuracy: 0.2% (full range)
Resolution: 1mm/1cm
Display: 4-digit LCD or 6-digit LED
Signal output: DC4~20mA
Output load: 0~500 Ω
Environmental temperature: -40~+75 ℃
Detection cycle: 1 second
Power supply:
YW-SD type: DC24V (± 10%) 0.1A
YW-SA type: AC220V (± 20%) 0.05A
Parameter setting: 3-digit sensitive button
Cable device: PG11 × 2 sealing sleeve
Shell material: ABS
Shell protection level: IP67
Dimensions: 100 × 80 × 68mm
Installation method: wall mounted
Via distance: 90 × 60mm