UHS-KG series magnetic liquid level controllerDetailed product description：

Overview
The UHS-KG series magnetic liquid level controller outputs a switch signal for the liquid level. The product, in conjunction with the corresponding external circuit, can be used for liquid level control and alarm in various open or closed containers such as petroleum, chemical, textile, printing and dyeing, environmental protection, and civil construction.

Characteristics
Simple structure, easy installation, reliable operation, easy maintenance, and low price.
Widely applicable and suitable for liquid level control of various media.
structural principle
Using a magnetic float to rise or fall with the liquid level, the sensor detects the action of the dry spring chip at the set position inside the tube, and sends out a contact on/off conversion signal.

Technical parameters of UHS-KG series magnetic liquid level controller

Accuracy: ± 10mm
Control height: 0-300 to 0-8000mm
Connection flange size: DN100, PN1.0, 1.6 (flange connection)
Magnetic floating ball: standard diameter 90, special supply diameter 150, diameter 60
Explosion proof grade: Explosion proof type: dIIBT4 Intrinsic safety type: ibIICT4
Control contact capacity: AC220V, 1A (resistive) DC24V、0.5A
Control contact life: 5 × 104 times
Control the number of connection points: Choose between 1, 2, 3, and 4 points (if more than 4 points, please specify when ordering)
Outgoing interface thread: M20 × 1.5 internal thread.

example
Measure the liquid level of the high-level water tank using a UHS-KG magnetic liquid level controller. The connecting flange is made of stainless steel and the installation form is flange connection. The control installation height is 2000mm, and the control contact is normally open (lower limit) at 500mm and normally closed (upper limit) at 1600mm. The normal temperature, normal pressure, and ordinary waterproof junction box have a medium density of 1.0g/cm3. Selection mark: UHS-KG-D-1.0-2000-500K/1600B-A1A

Ordering Instructions
Please specify when placing an order:
Specification, model, working temperature measurement range and control height, material requirements, working pressure, additional requirements