JGX-1 Tool MicroscopeDetailed product description：

JGX-1 Tool Microscope

Introduction:
The JGX-1 small tool microscope is one of the versatile precision optical metrology instruments that uses imaging as the measurement principle. Wide measurement range, accurate and reliable, easy to operate. Therefore, it is particularly suitable for precision machinery manufacturing and tool manufacturing industries.

The main scope of use is as follows:
1. Measure the shape template, template knife, etc. according to the Cartesian coordinates: If additional projection equipment is used on the instrument, it can be used as a contour projector, which can be used to compare the pre drawn contour with the projected contour.
2. Measurement of threads, determination of pitch, outer diameter, and inner diameter of threads, measurement of pitch, helix angle, helix angle on the profile position and thread shape of the threaded shaft (roundness, flatness, straightness, etc. of the tooth surface)
3. Measuring angles, measuring the helix angle of thread comb shaped turning tools, thread milling cutters, contour angles of various template milling cutters, and angles of various shape templates.
The JGX-1 small tool microscope can also be used as an observation microscope, such as for surface smoothness testing and other similar tasks.
The JGX-1 small tool microscope can be equipped with special equipment and accessories, and can change different magnification factors, making it extremely convenient for measuring complex or small workpieces.

JGX-1 Tool Microscope Technical Parameters:

Type	JGX-1
Division value	Dividing value of micrometer drum: 0.01mm
	Angle division value in angle measuring eyepiece: 1 '
	Angle division value in the contour eyepiece: 10 '
	The division value of the pole inclination ruler is 1 °
Measurement range	Vertical travel	Application micrometer screw: 0-25mm
		Application of micrometer screw and measuring block: 0-75mm
	Lateral travel	Application micrometer screw: 0-25mm
		Angle division range of angle measuring eyepiece: 0-360 °
		Contour eyepiece angle division range: ± 7 °
		Lateral tilt range of microscope column: ≈± 12 °
Microscope cantilever extension length	≈83mm
Distance between workbench and objective lens	Maximum 130mm
The length of the workpiece allowed by the ejector pin holder	Workpieces not exceeding ф 25: maximum length 220mm
	Workpieces not exceeding ф 55: maximum length 100mm
Overall Dimensions	Width * Length: 350mm * 600mm
	Height without projection equipment: 530mm
	Height with projection equipment: 730mm
Weight	Instrument weight: 20KG
	Projection equipment weight: 5.5KG