EJA440 High static pressure transmitter-[Quotation-data]--Shanghai Huabang Industrial Business-www.91way.com

Product name：

EJA440 High static pressure transmitter

specification：

Zoom in on the image

Category：

instrumentation and meters -- pressure controller

Price：

factory price

Brand：

Shanghai

Place of Origin：

China

Available Quantity：

batch

delivery cycle：

Spot goods (or inquire by telephone)

Shanghai Beiyuan Industry and Trade Co.,Ltd
+86-21-66770508
+86-13901609058

91way@163.com
13901609058(Wechat)

EJA440 High static pressure transmitterDetailed product description：

I. Overview
The EJA440A high static pressure transmitter is used to measure the pressure of gases, liquids, and vapors, and then convert it into a 4-20mADC current signal output.
C membrane box D membrane box
Measurement range -0.1~32MPa
（-15~4500psi） -0.1~50MPa
（-15~7200psi）
Measurement range 5-32MPa
（720~4500psi） 5~50MPa
（720~7200psi）
Accuracy ± 0.12% ± 0.12%
Protection level IP67, NEMA 4X, and JIS C0920 immersion proof type
Explosion proof specifications FM, CENELEC ATEX, CSA, IECEx
Output signal 4~20mA DC or FOUNDATION ™ Fieldbus or PROFIBUS PA two-wire digital communication
Power supply BRAN and HART: 10.5~42V DC (intrinsic safety type: 10.5~30V DC)
Fieldbus: 9~32V DC (Intrinsic Safety Entity Mode 9~24V DC, Intrinsic Safety FISCO Mode 9~17.5V DC)
Environmental temperature -40~85 ℃ (-40~185 ℃) (ordinary type)
-30~80 ℃ (-22~176 ℃) (internal indicator)
Process temperature -40~120 ℃ (-40~248 ℃) (ordinary type)
Maximum Overpressure 48MPa (6750psig) 60MPa (8500psig)
Install 2-inch pipe installation
Material of the liquid receiving component: membrane box SUS316L (membrane: Hastelloy C-276)
Container flange SUS316
Aluminum alloy or SUS316 stainless steel shell (optional)

2、 Selection Table
Basic specification code: EJA440A-DCS5A-92NN

Item 1: Output signal	-D 4-20mA DC/BRAN protocol digital communication -E 4-20mA DC/HART protocol digital communication -F FF fieldbus
Item 2: Measurement range (membrane box)	C 5-32MPa D 5-50MPa
Item 3: Material of liquid receiving parts	S JIS SCS14A JIS SUS316L JIS SUS316
Item 4: Process Interface	0 without process connector (Rc1/4 internal thread on chamber flange) 1 with Rc1/4 internal thread flange 2 with Rc1/2 internal thread flange 3 process joints with 1/4NPT internal threads Process connector with 1/2NPT internal thread 5. No process joint (1/4NPT internal thread on the chamber flange)
Item 5: Material of bolts and nuts	A JIS SCM435 32MPa 50MPa B JIS SUS630 32MPa 50MPa C JIS SUH660 32MPa 50MPa
Item 6: Installation Method	-2 Vertical installation, high voltage on the right, process connector on top -3 Vertical installation, high voltage on the right, process connector at the bottom -6 Vertical installation, high voltage on the left, process connector on top -7 Vertical installation, high voltage on the left, process connector at the bottom -8 level installation, high voltage on the right side -9 horizontal installation, high pressure on the left side
Item 7: Electrical Interface	0 G1/2 internal thread, one electrical interface 2 1/2NPT internal thread two electrical interfaces without blind plugs 3 Pg13.5 internal thread two electrical interfaces without blind plugs 4 M20 internal thread with two electrical interfaces, no blind plugs 5 G1/2 internal thread two electrical interfaces, one blind plug 7 1/2NPT internal thread two electrical interfaces, one blind plug 8 Pg13.5 internal thread two electrical interfaces, one blind plug Two electrical interfaces with 9 M20 internal threads and one blind plug
Item 8: Display Table	D digital display meter Digital display meter with measurement range setting button N No display table
Item 9: Installing the bracket	A SECC flat bracket B SUS304 flat bracket C SECC L-shaped bracket D SUS304 L-shaped bracket N No installation bracket

3、 Additional features

Item: Explosion proof type, intrinsic safety type	unspecified NF1 NEPSI Explosion proof License: d Ⅱ CT6 Environmental Temperature: -40-60 ℃ Electrical Interface: 1/2NPT FF1 FM Explosion proof Permit C1: I-II&III Div 1&2, Gps. B, C, D, E, F&G NEMA 4X Temperature: C1: T6 FF15 FM Explosion proof License C1: I-II&III Div 1&2, Gps. B, C, D, E, F&G NEMA 4X Temperature: C1: T6 KF1 CENELEC (KEMA) Explosion proof License: EExd Ⅱ CT4, T5, T6 KF5 CENELEC (KEMA) Explosion proof License: EExd Ⅱ CT4, T5, T6 CF1 CSA Explosion proof License C1: I-II&III Div, 1&2, GPS, B, C, D, E, F,&G ENCL: Type4X Temperature: CI: T4, T5, T6 CF15 CSA Explosion proof License C1: I-II&III Div, 1&2, GPS, B, C, D, E, F,&G ENCL: Type4X Temperature: CI: T4, T5, T6 NS1 NEPSI intrinsic safety license: ia Ⅱ CT4 environmental temperature: -40-60 ℃ electrical interface: 1/2NPT FS1 FM intrinsic safety license intrinsic safety C1: I-II&III Div, 1&2, Gps, B, C, D, E, F,&G non combustible C1: I-II&III Div, 1&2, Gps, B, C, D, E, F&G KS1 CENELEC (KEMA) intrinsic safety license: EEx ia Ⅱ CT4 CS1 CSA intrinsic safety license: C1: I-II&III Div, 1&2, GPS, A, B, C, D, E, F&G ENCL: Type4X Temperature C1: T4 FU1 includes FF1 and FS1 KU1 includes KF1.KS1 and N-type KEMA, N-type EX nA Ⅱ CT4 CU1 includes CF1 and CS1 SU1 SAA explosion-proof and intrinsically safe with spark free Ex d Ⅱ CT6/T5/T4 IP67, Ex ia Ⅱ CT4 IP67, Ex n Ⅱ CT4 IP67 KS5 CENELEC (KEMA) intrinsic safety explosion-proof: [Entity mode]: EEx ia Ⅱ CT4; [Fisco mode]: EEx ia Ⅱ CT4/EEx ia Ⅱ BT4
Item 2: Explosion proof sealing joint	unspecified G71 Connection Port: 1/2NPT Applicable Cable Outer Diameter: Φ 8.5 ± 0.5 (1 piece) G72 Connection Port: 1/2NPT Applicable Cable Outer Diameter: Φ 8.5 ± 0.5 (1 piece) G81 Connection Port: 1/2NPT Applicable Cable Outer Diameter: Φ 8.5 ± 0.5 (2 pieces) G82 Connection Port: 1/2NPT Applicable Cable Outer Diameter: Φ 8.5 ± 0.5 (2 pieces)
Item 3: Painting: Color change or painting change	unspecified P1 color change only applies to transmitter housing Munsell logo code: N1.5, black The P2 color change is only applicable to the transmitter housing Munsell logo code: 7.5BG4/1.5 green P7 color change only applies to transmitter housing metal silver X1<, SPAN style="FONT-SZE: 10pt;">Paint Change Epoxy Tree Baking Paint
Item 4: Lightning Protection Device	unspecified A transmitter power supply voltage: 10.5-32V DC (intrinsic safety type: 10.5-30V DC) Maximum allowable current: 6000A (1X4 μ S), repeated 1000A (1X40 μ S) 100 times
Item 5: Prohibition of oil treatment or prohibition of water and oil treatment	unspecified K1 degreasing and cleaning treatment K2 degreasing and cleaning treatment, and the membrane box is filled with fluorine oil, with a usage temperature of -20-80 ℃ K5 degreasing, washing and drying treatment K6 degreasing, washing, and drying treatment membrane box flushing tank fluorine oil, operating temperature: -20 ℃~80 ℃
Item 6: Calibration Unit	unspecified D1 P correction (Psi unit) D3 bar calibration (in bar units) D4 M correction (kgf/cm2)
Item 7: Sealing treatment of SUS630 nut	unspecified Surface coating of SUS630 bolts and nuts for Y fastening chamber flange (liquid silicone rubber)
Item 8: Long exhaust plug	unspecified U total length: 112mm (standard type: 32mm)
Item 9: NAMUK NE43 (1)	unspecified C3 (NAMUK NE43) [output signal 3.8-20.5mA] fault alarm output 110%, above 21.6mA
Item 10: NAMUK NE43 (2)	unspecified C2 (NAMUK NE43) [output signal 3.8-20.5mA] fault alarm output -5%, below 3.2mA
Item 11: Output set to low side when CPU exception occurs	unspecified C1 low side: ≤ -5% (3.2mA DC)
Item 12: Stainless steel amplifier housing	unspecified E1 amplifier housing material: SCS14A stainless steel (equivalent to SUS316L cast stainless steel or ASTM CF-8M)
Item 13: Quick Response	unspecified F1 refresh time: ≤ 0.125 seconds Response time (including minimum damping time constant): up to 0.3 seconds
Item 14: PID/LM Function	unspecified LC1 PID control function, Link Master function
Item 15: Configuration	unspecified R1 User Configuration Software
Item 16: Gold plated film	unspecified A1 sealing membrane gold-plated
Item 17: Container flange options	unspecified N1 without exhaust plug N2 N1 and without process joints, with DIN 19213 7/16 inch x 20 internal threads (installation threads) machined on both sides of the chamber flange, and blind plugs on the rear side N3 N1, N2 chamber flange, diaphragm, body, and blind plug accessory manufacturing certification
Item 18: Stainless Steel Tag Plate	unspecified N4 JIS SUS304 stainless steel tag plate fixed on the transmitter
Item 19: Accessory Manufacturing Certificate	Not specified M01 chamber flange M11 chamber flange, process joint
Item 20: Proof of stress test leakage test	unspecified T09 C membrane box test pressure: 32MPa test fluid: nitrogen retention time of 10 minutes T08 D membrane box test pressure: 50MPa test fluid: nitrogen retention time of 10 minutes

EJA440 High static pressure transmitter（schematic diagram）