Level-Ease Intelligent switch type RF admittance level gaugeDetailed product description：

The Level Enzyme intelligent switch type RF admittance level gauge is a highly intelligent level control instrument with unique creativity and wide applicability. It is developed on the basis of intelligent RF level technology and can overcome the impact of traditional measurement methods on accuracy and the troubles caused by complex calibration steps for users. This series of level switches has high measurement accuracy, maintenance free, and low operating costs. The product is widely used in fields such as petrochemicals, food, metallurgy, electricity, mining, water conservancy, pharmaceuticals, etc.

working principle
This product introduces the Level Enzyme RF admittance measurement technology from Canada's ARJAY Engineering Company. It uses the core components of Canada's ARJAY Engineering Company, and the pulse card (PMC) installed in the probe box converts the level change in the container into high-resolution pulse signals. The pulse signals can be transmitted to the controller through a dual core shielded cable, up to 1km away. The pulse signals are processed and analyzed by the microcontroller before outputting an alarm action. The instrument sets alarm points through buttons and stores the set alarm values in the E2PROM for a long time. To change the alarm point, simply press the setting button again.

Main features of Level Enzyme intelligent switch type RF admittance level gauge
By using radio frequency admittance measurement and microcontroller technology, almost all materials can be detected, including solids and liquids, conductive media, corrosion, viscous media, etc. Previous products generally required sensitivity adjustment for different materials, while this series of products does not require sensitivity adjustment for any material, but can ensure good measurement accuracy.
Adopting advanced data storage technology, parameters are not lost after power failure, and data can be saved for up to ten years. Fully sealed structure, without any mechanical moving parts or adjustable potentiometers. The product has extremely high reliability.
It can overcome the influence of adhesion layer and material splashing on the measurement of the probe. In these situations, the switch will not cause misoperation.
Simply press the setting button once to complete the setting of the alarm point. Easy to operate.
The alarm mode can be flexibly set according to needs.

Technical parameters
Control unit section
Environmental temperature: -30~70 ℃
Environmental humidity: ≤ 95% RH
Working mode: positional
Power supply: 220VAC or 24VDC
Power consumption:<2VA
Relay contact capacity: 3A220V, 3A24V
Probe section
Process temperature: -100~200 ℃, please contact us for higher temperatures
Process pressure: -0.1~10MPa
Probe length: 10cm to 300cm
Probe type: rigid, coaxial or flexible

Installation instructions and installation diagram
When installing the level switch, it should be installed at the top or on the side of the warehouse wall according to the different types and working conditions of the probe. When installing a level switch on the top, it should be installed in a position that can avoid material impact during feeding, and the distance from the warehouse wall should be greater than 200mm. When installing a level switch on the side, the probe should be tilted downward by 20-30 ° to avoid serious material hanging. When disassembling and assembling the level switch, be careful not to grip the housing with your hands and turn it. Use a wrench to turn the hexagonal bolt.