TS-5305 horizontal automatic exhaust valveDetailed product description：

TS-5305 horizontal automatic exhaust valve
1. Reliable performance. The material used for the emission device is PK-EP. Compared to all known synthetic materials, PK-EP has the best performance and highest reliability. PK-EP can withstand high temperatures (much higher than the working temperature of exhaust valves). The O-ring uses optimized material EPDM to ensure good elasticity and operational reliability even at high temperatures. The internal spring of the exhaust valve core is made of special materials and nickel plated stainless steel to prevent oxidation (which may affect the movement of the core); The exhaust mechanism of the exhaust valve is very reliable, and each valve undergoes exhaust and pressure sealing tests before leaving the factory. Each individual component is cast with high precision to achieve perfect assembly.
2. Easy maintenance. The automatic exhaust system is equipped with an H18 blocking valve, which allows for easy removal of the exhaust valve from the system for maintenance without the need to drain the system due to water leakage.
3. Only exhaust, no drainage. The design of the steam and water separation disc adopts a special structure to ensure that there is no drainage during exhaust.
As long as there is pressure in the system, the exhaust valve will continuously exhaust

TS-5305 Horizontal Automatic Exhaust Valve Instructions:
1、 The automatic exhaust valve used for pipeline exhaust should be installed at the top of the hot water circulation, where gas is prone to accumulate.
2、 To prevent impurities from falling into the exhaust hole, the exhaust cap should be slightly loosened during use to facilitate exhaust. If the exhaust cap is sufficient for safe moisture absorption, it should be fully tightened.
3、 Exhaust valves should not be installed in places that are prone to freezing.
4、 The automatic exhaust valve installed on the radiator should have a vertical upward exhaust direction.

Technical parameters of automatic exhaust valve:
Inlet working pressure: 10 bar, water temperature: 115 ℃, interface size: DN15, DN20