HG-2800 series online vibration monitoring instrumentDetailed product description：

Overview
The HG-2800 single, dual, and four channel online vibration monitoring instrument is a simple system specifically designed for online monitoring of equipment vibration. It can monitor the displacement, velocity, and acceleration values of various rotating machinery equipment online for a long time, and has an over limit alarm function. Very suitable for simple online monitoring of the vibration status of various equipment such as fans, motors, pumps, turbines, air compressors, and machine tools in industrial and mining enterprises, and can diagnose and distinguish equipment fault types based on the monitoring values of different vibration parameters. It is a low-cost vibration online monitoring solution.

performance metrics

Sensor type: ICP accelerometer sensor
Maximum signal distance of sensor: 100 (m)
Acceleration measurement range: 0.1-199.9m/s2 (0-P)
Speed measurement range: 0.1-199.9mm/s (rms)
Displacement measurement range: 0.001-1.999mm (P-P)
Vibration frequency range: Low frequency 10Hz~1KHz (acceleration, velocity, displacement)
High frequency range of 1KHz to 10KHz (acceleration)
Alarm: Each channel's independent relay alarm is activated (normally open and normally closed optional)
Relay load: 0.6A/125VAC 2A/30VDC 0.5A/110VDC
Alarm threshold: Each channel can be set independently and freely;
Configuration: 1, 2, 4 channels, of which 4 channels are for each channel's round robin display;
Power supply: AC 220V (DC 24V optional)
485 communication interface (with communication protocol attached)