IK3 Multi turn intelligent electric actuatorDetailed product description：

IK3 multi turn intelligent electric actuator

Introduction to the main functional features of IK3:
1. Non invasive (no need to open the lid to set parameters);
2. Chinese or English interface LCD display;
3. The on-site buttons adopt dust-proof protection design and non through magnetic steel control Hall elements inside the electrical housing, which can flexibly set parameters;
4. Infrared remote control function, the same as the on-site operation setting method;
5. No need for batteries, with automatic power-off memory function to ensure that parameters have been set and real-time display data storage is available;
6. Input and output optoelectronic isolation, with high voltage protection function, can be freely connected to any equipment or instrument;
7. Up to four single-chip computers are used for data exchange and processing to improve module response speed and achieve high-precision servo control;
8. It has complete automatic phase detection, commutation, phase loss, overheating, overload and other protection functions to ensure that the electric actuator is intact in any fault state;
9. Reversing delay: When the actuator needs to change direction during operation, there is an optimal delay time to protect the actuator from mechanical damage during sudden commutation.
10. It has the function of selecting positive and negative effects to meet the needs of actual working conditions;
11. It has the function of accumulating the number of times the electric actuator has been operated, so that users can know the total number of times the electric actuator has been operated at any time;
12. Adopting spark free commutation technology and controllable silicon components to control the output, it truly realizes modular control of high-power motors and improves product reliability;
13. ESD emergency event function selection: emergency action in place, fully open, fully closed;
14. Comprehensive fault alarm (power outage, motor overheating, phase loss, overload, signal interruption, ESD over protection);
15. Remote switch control has two types of power supply: internal power supply and external power supply. External power supply methods: DC24V, AC220V;
16. The adjustable series electric actuator can be freely converted with the switch type series electric actuator;
17. This series of intelligent electric actuators includes: local operation, on-site operation, infrared remote control, remote analog input control, and remote switch input control
18. Equipped with sensitivity adjustment function for electric actuators, and set control ranges for different control requirements;
19. Mechanical torque measurement device: The use of mechanical transmission devices to measure the load torque of actuators is currently the preferred method for most traditional actuators. Its characteristics are high measurement accuracy, stability, and reliability. Our intelligent electric actuators still use this method, transmitting the precise value of torque to the CPU for processing, achieving high-precision torque parameter acquisition.
20. Sensor fault protection: If the position sensor itself fails or the signal during actuator operation remains unchanged for 5 seconds and is opposite to the switch signal, the travel monitoring system will issue a command to forcibly stop the electric actuator and issue remote and on-site alarms.
21. Travel limit protection function: During valve opening and closing travel settings and valve operation, the servo module protects the travel signal acquisition unit. If the electric exceeds the protection range, the travel monitoring system will issue a command to forcibly stop the electric actuator and issue remote and on-site alarms.