V8 type FLOTECT-TM blade flow switchDetailed product description：

The V8 FLOTECT-TM blade type flow switch protects the equipment from damage caused by insufficient coolant or lubricant, and issues an alarm and controls it when its flow rate is too high The SPDT quick action switch can control electronic devices and alarm systems to increase or decrease the flow rate of liquids An external switch body and blades are both made of chemical resistant polystyrene sulfide, and adjustable blades are available in various models suitable for 1-6 inch pipelines Please refer to the chart for the approximate traffic volume
A simple and reliable design utilizes an external magnetic linkage device to activate the switch protected within the leak proof casing.

Physical parameters:

maximum temperature	maximum pressure	connection method	weight	rated current	conductor	total length
212℉ (100℃)	150 PSIG (10.3BAR)	1″NPT(M)	4.5 ounces （128g）	5A,@125/250VAC	18AWG×18″ （45.7cm）	9.37in. ( 23.8cm)
housing material	switch type	blade	Install	wet material	Setpoint adjustment
Polyphenylene sulfide	SPDT	on-site adjustment	Vertical to the flow direction	Polyphenylene sulfide Ceramic, 316SS	knurled nut

V8 FLOTECT-TM blade flow switch model:

V8 FLOTECT-TM blade flow switch
Cold water approximate action/release action flow rate The numbers above are in GPM units, while the numbers below are in LPM units		For air approximation/release action flow rate The upper number is in SCFM units, and the lower number is in LPM units
pipe size		pipe size
1"	10.8/9.1 40.9/34.6	1"	39/32.6 1105/923
1-1/4"	9.8/8.3 37.2/31.4	1-1/4"	37.5/32.2 1062/912
1-1/2"	8.6/6.8 32.4/25.7	1-1/2"	33.4/26.7 945/757
2"	10.9/8.8 41.2/33.4	2"	43/36.8 1218/1042
3"	12.9/8.9 48.8/33.5	3"	52.7/38.9 1493/1100
4"	21.1/13.8 79.7/52.2	4"	87.6/63.6 2482/1802
6"	45/33 170.2/124.7	6"	168.6/137.4 775/3890