V12 Right angle flow switchDetailed product description：

The V12 series Flotect flow switch is a low-cost switch, and its universal circuit allows it to be used in various structures and applications. The installation direction is arbitrary, and the V12 series flow switch uses a freely movable shuttle displayed by liquid flow to activate an isolated and sealed reed switch. The medium used in this model is compatible with Noryl GFN3, stainless steel, and ceramic products.
application
Detecting the flow rate of water and other compatible media, especially suitable for water tanks and mineral water industries, to protect equipment from damage caused by coolant loss or lubricant flow, process system operation, monitoring chlorinators, water filtration, reverse leakage, and evaporation.

Physical parameters of V12 right angle flow switch:

Operating Temperature	switch	Set point accuracy	Set point error	Excitation magnet	spring	fixed clip	weight	Import and export interface	Wire
90℃ maximum	SPDT Reed switch	±20%	20% of the maximum value	Ceramics 1	three hundred and sixteen stainless steel	PH15-7Mo stainless steel	119 grams	1 "Yin NPT pipe	22AWG,18" (460mm) long

Switch housing and shuttle: Noryl GFN3 (polyphenylene ether and polystyrene)
Electrical rating: 1.5A, 24VDC withstand voltage, (0.001A, 200VDC withstand voltage), 0.5A, 125VAC
Work pressure (maximum)
100PSIG (690Kpa) at 70 ℉ (21 ℃)
50PSIG (345Kpa) at 194 ℉ (90 ℃)

model

V8 FLOTECT-TM blade flow switch
model	The activation setting point of the switch in the vertical upward direction when increasing the flow rate (water)
	Gallons per minute	Liters per minute
V12-2	zero point five	one point eight nine two
V12-3	one	three point seven eight five
V12-4	two point five	nine point four six two
V12-5	five	eighteen point nine two four

Type	Parameters
Material of liquid receiving components	Switch casing and shuttle	Noryl GFN3 (polyphenylene ether and polystyrene)
	spring	316 Stainless Steel
	fixed clip	PH15-7Mo stainless steel
	Excitation magnet	Ceramics 1
Work pressure (maximum)	100PSIG (690Kpa) at 70 ℉ (21 ℃) 50PSIG (345Kpa) at 194 ℉ (90 ℃)
Operating Temperature	194 ℉ (90 ℃) maximum value
Set point accuracy	±20%
Set point error	20% of the maximum value
switch	SPDT reed switch
Electrical Rating	1.5A, 24VDC withstand voltage, (0.001A, 200VDC withstand voltage), 0.5A, 125VAC
Wire	22AWG, 18 '(460mm) long
Import/export interface	1 'Yin NPT pipe
weight	4.2 ounces (119 grams)