LKB-03 series flow controllerDetailed product description：

Product Introduction:
The LKB-03 series flow controller uses target sensors and can be used in water, cooling systems, or other fluid circuits It plays an alarm and automatic control role in the flow rate of pipeline water
Basic performance (unit: L/min)

set the scope	differential gap	repeatability error	pressure resistance	Ambient temperature	medium temperature	Shell protection level	interface
6~30	≤6	≤1.5	1.6MPa	5-40℃	5-80℃	IP54 (compliant with GB4208)	Internal thread 3/4“

Contact capacity:
AC 250V 3A (resistive) conversion contact 1 pair (with normally open and normally closed)
Shell protection level: IP54 (compliant with GB4208)
Installation position: The arrow on the casing should be consistent with the direction of water flow, and there needs to be a guide with a length of 10D (pipe diameter) in front of the controller.
Adjustment method: Open the casing, adjust the screws on the switch according to the flow rate, and adjust the flow rate in the direction indicated on the switch.

Notes:
The lower switching value of LKB-03 series flow controller is the set value, and the controller setting range is the lower switching value setting range;
When opening the controller cover, do not turn the internal screws or move the internal parts;
The medium pressure should not exceed the maximum allowable pressure specified;
The surrounding environment is free of corrosive gases;
The controller is guaranteed for 18 months from the date of manufacture. If it is a product quality issue, our factory is responsible for the quality issue and is responsible for timely repair or replacement