FLRN36-12 type load switch (electric, three position)Detailed product description：

The FLN36-12 sulfur hexafluoride load switch is suitable for use in three-phase AC 50Hz, rated voltage 12kV ring network power supply or double amplitude radiation power supply systems. It is used to turn on and off load currents and overload currents, and can also be used to turn on and off no-load long lines, no-load transformers, and capacitor banks. The series combination of load switch and current limiting fuse can be used instead of circuit breaker, that is, the load switch is responsible for closing and breaking various load currents, while the current limiting fuse is responsible for breaking larger overload currents and short-circuit currents.

1. FLRN36-12 load switch (electric, three position) features: double break, three position, rotating moving contact.
2. Good insulation performance, the load switch is sealed with upper and lower shells cast with epoxy resin, and filled with 0.045mpa SF6 gas inside. The main circuit and grounding circuit system are all placed inside the shell.
3. Good safety performance. If an internal arc occurs and there is a weak structural point at the rear of the casing, it will be blown open. Subsequently, the arc relief valve on the cabinet will be opened and the overpressure airflow will be directed outside the cabinet.
4. Both manual and electric operation are available, with convenient and reliable operation.
Three phase overall installation, good periodicity, few components, easy adjustment and installation, simple and feasible. Maintenance free, long lifespan.