TC9000-NDA type tension controllerDetailed product description：

The TC9000-NDA tension controller is suitable for situations where tension is controlled by floating rollers. It receives the signal output from the angle sensor, processes it through internal PID operation, and outputs the signal to adjust the actuator to control the tension to adapt to changes in the roll diameter. It can be used for various processes such as unwinding, rewinding, and feeding, providing high-precision and repeatable tension control. Its control method is constant tension control, which is easy to achieve high-speed coil changing and has good buffering and absorption effects during acceleration and deceleration. Especially suitable for high-speed printing machines, high-speed slitting machines, high-speed laminating machines, winding machines, etc.

Features:

Using a 16 bit high-precision D/A converter, the output accuracy can reach up to 0.1%, and the tension control is more precise.
It can directly drive magnetic powder (electromagnetic) clutches/brakes, and also control variable frequency, servo, etc.
Humanized interface design, very easy to operate.
Multi line LCD display, Chinese and English menus, simple programming, convenient and clear.
Equipped with a storage box, various parameters can be backed up.
Metal casing, sturdy and aesthetically pleasing, with strong electromagnetic interference resistance.
Plug and unplug terminals, easy to install wiring

terminal name	project	specification
[01]+SENSOR	power output	+15VDC， Positive pole of angle sensor power supply.
[02]SENSOR IN	Analog input	Angle sensor input signal terminal.
[03]GND	power output	Power common terminal.
[04]-SENSOR	power output	-15VDC， Negative pole of angle sensor power supply.
[05]SHIELD		Shielded end.
[11]0～10V	Analog output	Control the output of 0-10VDC for power amplifiers, servo amplifiers, etc.
[12]0～24V	Analog output	Control output 0-24VDC to directly drive magnetic powder clutch/brake, etc.
[13]OUT COM	Analog output	The controller outputs a control voltage common terminal.
[14]		backup
[15]M1 1	Digital input	Tap control signal input terminal.
[16]M1 2	Digital input	PID gain setting signal input terminal.
[17]M1 3	Digital input	backup
[18]RUN／STOP	Digital input	Run/stop signal input terminal.
[19]MIC	Digital input	Digital input public terminal.
[20]ANG 1	Analog input	Analog signal 1 input terminal.
[21)ANG 2	Analog input	Analog signal 2 input terminal.
[22]ANG COM	Analog input	Analog input common terminal.
[23]ALM NO	Discrete output	Alarm signal output terminal.
[24]ALM COM	Discrete output	Alarm signal common terminal.
[25]OPTO+	working power supply	Optoelectronic isolation power input terminal (positive pole).
[26]OPTO-	working power supply	Optoelectronic isolation power input terminal (negative pole).
[27]DC24V+	working power supply	DC24V positive pole, current above 4A.
[28]DC COM	working power supply	DC24V negative pole.