TC9000-N1 High precision fully digital tension controllerDetailed product description：

Product Overview:
TC9000-N1 is a high-precision fully digital tension controller. By receiving the signal transmitted by the tension sensor and processing it through internal intelligent PID calculation, the output signal is adjusted to regulate the actuator to control the change in tension and roll diameter. Internally equipped with functions such as parking output memory, pre start value setting, parking gain setting, jog output setting, PID gain setting, roll change setting, taper setting, etc., for simpler and more accurate tension control.

TC9000-N1 high-precision fully digital tension controller features:

·Using a 16 bit high-precision D/A converter, the output accuracy can reach up to 0.1%, and the tension control is more precise.
·It can directly drive magnetic powder (electromagnetic) clutches/brakes, and also control variable frequency, servo, etc.
·Can accept single or dual sensor input signals, automatically zero and calibrate.
·Humanized interface design, very easy to operate.
·Multi line LCD display, Chinese and English menus, simple programming, convenient and clear.
·There is a password function inside, which can avoid accidental operation to change the set parameters.
·Equipped with a storage box, various parameters can be backed up.
·Metal casing, sturdy and aesthetically pleasing, with strong electromagnetic interference resistance.
·Plug and unplug terminals, easy to install wiring

Technical Specifications:

terminal name	project		specification
DC24V+	Power supply	input	DC24V positive pole, current above 4A.
DCCOM			DC24V negative pole.
OPTO+			Optoelectronic isolation power supply input 5-30VDC.
OPTO-			Optoelectronic isolation power supply input negative pole.
+UCELL		output	5VDC， The positive pole of the tension sensor power supply is connected to the red wire.
GND			The negative pole of the tension sensor power supply is connected to a black wire.
MI 1	digital signal	input	Tap control signal input terminal.
MI 2			PID gain setting signal input terminal.
MI 3			backup
RUN/STOP			Run/stop signal input terminal.
MIC			Digital input public terminal.
CELL+	analog signal	input	The input signal terminal of the tension sensor is connected to a white wire.
CELL－			Tension sensor input signal terminal, connect green wire.
ANG1			Analog signal 1 input terminal.
ANG2			Analog signal 2 input terminal.
ANGCOM			Analog input common terminal.
0~10V		output	Control the output of 0-10VDC for power amplifiers, servo amplifiers, etc.
0~24V			Control output 0~24VDC to directly drive magnetic powder clutch/brake, etc.
OUTCOM			The controller outputs a control voltage common terminal.
ALMNO	alarm signal	output	Alarm signal output terminal.
ALMCOM			Alarm signal common terminal.