I. Overview
The XJ type non clogging pulp pump is a practical use that has the characteristics of high efficiency, no or minimal leakage, good anti clogging performance, smooth operation, high reliability, and compact structure. Mainly reflected in the following aspects: using semi open or fully open impellers, adjustable clearance between the wear-resistant plate and the front side of the impeller, mainly using mechanical seals and high-precision bearings (D-level precision) and high-quality shaft materials, etc. Therefore, XJ pulp pump is your ideal "helper". Your success is also our constant pursuit.

2、 Purpose:
The XJ pulp pump can be widely used in the transportation of pulp with a temperature below 110 ℃ and a concentration below 6% in the light industry and papermaking industry. It can also be used in industrial and urban water supply, drainage and other occasions.

3、 Model meaning

4、 Structure Introduction
1. The XJ pulp pump is a single-stage single suction cantilever structure, mainly composed of pump body, impeller, pump cover, wear-resistant plate and suspension components;
From the motor end, the motor rotates clockwise, and the pump sucks in axially and discharges radially (in the middle);
3. The pump shaft is supported by two high rolling bearings and lubricated with thin oil (20 # engine oil);
4. The shaft seal adopts two types: mechanical seal or packing;
5. The pump and motor are directly driven by a pin coupling.

5、 Materials

The material of each overcurrent component of the pump is HT200, QT450-10, ZG35 or ZG1Cr18Ni9Ti, and the shaft material is 40Cr or 3Cr13.

6、 Performance Range
Flow rate: 20-400m3/h Speed: 1450r/min

Head: 10-32m Power: 1.5-55KW

7、 Performance parameters of XJ pulp pump