Y-shaped pneumatic oil drum pump (also known as pneumatic slurry pump, pneumatic piston pump, pneumatic plunger pump, pneumatic thick slurry pump, pneumatic reciprocating pump, pneumatic gluing pump, pneumatic pumping pump, pneumatic explosion-proof stainless steel pump, leather spraying pump). Pneumatic slurry pumps are applied in industries such as artificial leather, transfer film leather, calendered leather, color coated board, printing and dyeing, medicine, coating, chemical industry, textile, spray painting, spray coating, thin film aluminum plating, color steel tiles, etc. Suitable for the transportation of chemical slurry with high viscosity (VIS) ≤ 120000 CPS/25 ℃, it has functions such as explosion-proof, anti-corrosion, sedimentation prevention, low noise, and energy saving. It is an ideal mobile conveying device.
This product uses the effect of air pressure difference to make the piston run up and down, driving the opening and closing of the feeding piston, and playing the role of material lifting. Adjust the flow rate and pressure of the working gas for the pneumatic slurry pump to control and regulate the feeding flow rate of the pneumatic slurry pump. Combined with induction switches, it can work automatically. Shanghai Yugong Pump Industry, a water pump manufacturer in Shanghai, welcomes new and old users to purchase.  

Instructions for using oil drum pump:
1. First, correctly place the guide tube into the material bucket to be conveyed.  
2. Connect the corrosion-resistant hose to the discharge port and connect it to the feeding location.  
3. The intake valve is in the closed state, then connect the air source pipe to the intake valve joint, and open the intake valve according to the required slurry flow rate to adjust the operating frequency of the throttle slurry pump, and it can start working.  

Maintenance and upkeep of oil drum pump:
1. During use, the pneumatic slurry pump should be prevented from colliding with the cylinder body to avoid deformation, which may cause the plug to get stuck and result in scrapping
2. After running the piston for more than one million times, the cylinder body should be cleaned and coated with 30 # lubricating oil according to the water accumulation during the air supply process of the air compressor.  
3. If not used for a long time, it should be cleaned in a solvent to prevent the slurry from freezing and blocking the guide pipe.  

Structural description of oil drum pump:

1. Cylinder body
2. Intake valve
3. Spring
4. Spring
5. Piston
6. Exhaust pipe
7. Ventilation pipe
8. Sealed base
9. Seal the upper cover
10. Slurry cylinder body
11. Feed inlet
12. Slurry piston
13. Feed steel ball
14. Steel ball
15. Connecting rod
16. Slurry pipe
17. Discharge outlet
18. Refueling valve
19. Air release valve

Scope of use of oil drum pump:
The Y-shaped pneumatic bucket pump can transport media such as acid, alkali, salt, oil, beverages, etc., and is widely used in chemical, petrochemical, fine chemical, dye chemical, environmental protection, water treatment, medicine, food and other departments. The BSY type pneumatic bucket pump (oil bucket pump, pneumatic slurry pump, leather slurry pump, feeding slurry pump) is specially designed for conveying coating slurry in the leather industry and other industrial industries. It has the functions of corrosion resistance, sedimentation prevention, energy saving, etc., and is an ideal mobile conveying equipment.  

Performance parameters of oil drum pump: