HY-ZS3F type gear forward and reverse speed sensorDetailed product description：

HY-ZS3F gear forward and reverse speed sensor

The HY-ZS3F gear forward and reverse speed sensor is used to detect the forward and reverse rotation, speed, and linear velocity of the axle, gear, and rack. The acceleration of the measured object can also be obtained through calculation and processing. This sensor has good low-frequency and high-frequency characteristics. Low frequency can reach 0Hz and can be used for zero speed measurement of rotating machinery. As the sensor can provide two speed signals with a certain phase difference, it can be used for forward and reverse discrimination; The high frequency can reach up to 20KHz, which can meet the high-speed measurement requirements of the vast majority of industrial fields.

2. Technical parameters

1. Working voltage: 5-24V
2. Measurement range: 0-20KHz
3. Speed measuring gear form: module 2-4 (involute gear)
4. Output signal: Square wave, whose peak to peak value is equal to the amplitude of the working power supply voltage, independent of the speed, with a maximum output current of 20mA
5. Working temperature: -30 to+130 ℃
6. Thread specification: Φ 16 sensor (installation thread: M16 × 1)
7. Installation gap: 1-5mm

Ordering Guide:
HY-ZS3F—A□□—B□□
Sensor length A □□: 0 1-60mm; 0 2 * -80mm; 03——148mm
Thread specification B □□: 0 1- M10 × 1; 0 2——M12×1； 03*——M16×1； 0 2——M18×1； 03——M22×1

Ordering Guide:
HY-ZS3F—A□□—B□□
Sensor length A □□: 0 1-60mm; 0 2 * -80mm; 03——148mm
Thread specification B □□: 0 1- M10 × 1; 0 2——M12×1； 03*——M16×1； 0 4——M18×1； 05——M22×1