B-Z type vibration transmitterDetailed product description：

The B-Z vibration transmitter is equipped with an S-ZS vibration velocity sensor, which is used to measure the absolute vibration of rotating machinery bearings and output analog current signals. It can be connected to computers, DCS, PLC systems, paperless recorders and other equipment.
Fault monitoring: Monitor the absolute vibration of rotating machinery, such as casing vibration, bearing vibration, frame vibration, etc; Monitor the increase in vibration caused by rotor imbalance, misalignment, loose components, damaged rolling bearings, gear damage, etc.
Measurement parameters: displacement, velocity.
Unit type: Monitoring of vibration in small and medium-sized units, such as steam turbines, fans, compressors, motors, pumps, gearboxes, etc; Especially suitable for the renovation of old units.
Installation requirements: Only one screw hole needs to be drilled on the casing to fix the sensor on the double headed screw, without any operation inside the machine.

Technical parameters:
1. Input signal: vibration speed sensor output; Input impedance:>100K Ω
2. Sensitivity: 20-50 mV/mm/S ± 5%;
3. Frequency response: 10-300Hz;
4. Output signal: 4-20mA or 0-20V (can be designed according to user needs); Output impedance: ＜ 500 Ω
5. Range: 0-500 μ m (peak to peak); 0-50.0mm/s (true effective value)
6. Accuracy: ± 0.5%
7. Working voltage: DC24V, 18V, 15V, 12V, -24V, -18V, -15V, -12V or positive and negative power supply (can be designed according to user needs)
8. Working temperature: -30~50 ℃

Ordering Guide:
B-Z type vibration transmitter must be equipped with S-ZS type vibration velocity sensor to form a system
Selection code: B-Z-A □□
Selection instructions:
Range A □□:
01——0～100μm； 02*——0～200μm ； 03-0-500 μ m (vibration displacement)
04——0～10.0mm/S； 05*——0～20.0mm/S； 06-0-50.0mm/s (vibration intensity)