| 3051GP |
Pressure transmitter |
|
code |
Range KPa |
| two |
0-0.125~1.5 |
| three |
0-1.3~7.5 |
| four |
0-6.2~37.4 |
| five |
0-31.1~186.8 |
| six |
0-117~690 |
| seven |
0-345~2068 |
| eight |
0-1170~6890 |
| nine |
0-3450~20680 |
| 0 |
0-6890~41370 |
|
code |
output |
| E |
4-20mA |
| S |
Intelligent |
|
code name |
structural material |
| Flanges and fittings |
Exhaust/Drain Valve |
Isolation membrane |
Fill with liquid |
| twenty-two |
316 Stainless Steel |
316 Stainless Steel |
316 Stainless Steel |
silicone oil |
| twenty-three |
316 Stainless Steel |
316 Stainless Steel |
Hastelloy C |
| twenty-four |
316 Stainless Steel |
316 Stainless Steel |
Monel |
| twenty-five |
316 Stainless Steel |
316 Stainless Steel |
Tantalum |
| thirty-three |
Hastelloy C |
Hastelloy C |
Hastelloy C |
| thirty-five |
Hastelloy C |
Hastelloy C |
Tantalum |
| forty-four |
Monel |
Monel |
Monel |
|
code name |
option |
| M1 |
0-100% linear indicator table |
| M3 |
3 and a half digit LCD display table |
| M4 |
Smart meter display |
| B1 |
Pipe bending bracket |
| B2 |
Board mounted bending bracket |
| B3 |
Pipe mounted flat bracket |
| D1 |
The side relief valve is located at the upper part of the pressure chamber |
| D2 |
The side relief valve is located at the lower part of the pressure chamber |
| No note |
1/2NPT taper pipe threaded joint |
| C2 |
T-shaped threaded joint M20 × 1.5, with a ball cone connector welded with a rear end of a Ø 14 pressure pipe |
| d |
Explosion proof type d Ⅱ BT4 |
| i |
Intrinsic safety type ia Ⅱ CT6 |
| s |
Stainless steel three valve group |