WS-3/4/5-MK(MN) series clamp sanitary bimetallic electric contact thermometerDetailed product description：

WS-3/4/5-MK (MN) series clamp sanitary bimetallic thermometer
WS-3/4/5-MK (MN) series clamp sanitary bimetallic electric contact thermometer

Bimetallic thermometers are suitable for on-site detection of medium and low temperatures, and can directly measure the temperature of liquids, gases, and vapors. They are mercury free, have clear indications, are sturdy, and resistant to vibration. All instruments are made of stainless steel material, which has good waterproof and corrosion-resistant properties. Widely used in industries such as petroleum, chemical, metallurgical, textile, and food.  

Model name:


Technical parameters:

model	nominal diameter D(mm)	measurement range ℃	Grid value ℃	Insert length L(mm)	Diameter of protective tube d(mm)	install thread mm
WSS-3□	sixty	0-50 0-100 0-150 0-200 0-300 0-400 0-500	one two two five five ten ten	75;100; 150; 200; 250; 300; 400; five hundred	six	M16×1.5
WSS-4□ WSSX-4□	one hundred				ten	M27×2
WSS-5□	one hundred and fifty
					ten

Accuracy: ± 1.5%
Time constant: not greater than 40s
Protection tube pressure resistance: 6.3MPa
Rated power of electrical contact: 20VA (no inductive load)
Maximum operating current: 1A
Continuous current: 0.6A
Maximum operating voltage: 380VAC, 220VDC
Instrument execution standard: JB/T8803-1998

Installation method:

model	Overall dimensions mm
	D	H	L	L1	L2	L3	M
WSS-30□	sixty	/	75;100; 150; 200； 250; three hundred； 400； 500；	sixty-two	twelve		16×1.5
WSS-31□		forty-six		sixty
WSS-32□		forty-four		fifty-five
WSS-40□	one hundred	/		seventy-two	sixteen		27×2
WSS-41□		forty-six		ninety-four
WSS-42□		forty-four		eighty-two
WSS-48□		fifty-eight		sixty-four
WSS-50□	one hundred and fifty	/		seventy-two	sixteen
WSS-51□		forty-six		one hundred and twelve
WSS-52□		forty-four		eighty-two
WSS-58□		fifty-eight		sixty-four
WSSX-401	one hundred	/		seventy-two	sixteen	forty-two	27×2
WSSX-411		forty-six		ninety-four
WSSX-421		forty-four		eighty-two
WSSX-481		fifty-eight		sixty-four

WSSX wiring diagram:

The size of the clamp type flange is generally 1.5 inches, with the option of 2 inches or 2.5 inches“

Type/Parameters	H	D	f	M
1.5"	forty-eight	fifty point five	3/8-24 UNF 2B	thirty-two
2"	forty-eight	sixty-four	3/8-24 UNF 2B	thirty-two
2.5"	forty-eight	seventy-seven point five	3/8-24 UNF 2B	thirty-two

Usage and ordering instructions:
When using and installing, the protective tube should not be bent or deformed. The length of the protective tube submerged in the medium should not be less than 100mm. When measuring high flow or strongly corrosive media, a protective sleeve should be added.
Please specify the name, model, measurement range, protective tube length, and installation thread when placing an order.