B0300 Industrial grade micro pressure transmitterDetailed product description：

Product Introduction

Purpose:
Used for boiler negative pressure, HVAC, wind speed measurement, leak detection, clean room, power plant wind pressure, dust collector, air door control, etc.
Features:
Equipped with damping filter, less affected by dynamic pressure
Low power/wide temperature range LCD display table
High overload and high static pressure
Outdoor installation, IP65 protection
Provide positive/negative pressure composite range, with zero centered
Commonly used for differential pressure, pressure, and negative pressure measurement
Can measure damp, turbid gases and even liquids

Technical specifications of B0300B0300 industrial grade micro pressure transmitter product

range
Pressure: minimum 0-100Pa, maximum 0-700KPa
Differential pressure: minimum 0-100Pa, maximum 0-700KPa
Negative pressure: minimum -100Pa to 0, maximum -100KPa to 0
Absolute pressure: minimum 0-35KPa, maximum 0-200KPa
Positive and negative pressure composite: minimum -100Pa~0~100Pa, maximum -100KPa~0~100KPa
Operating Temperature
Sensor: -20-85 ℃
Circuit: -40~85 ℃
LCD display: -10 ℃~70 ℃
Accuracy (total of linearity, repeatability, and hysteresis)
When the range is less than 5kPa, the typical is 0.15%, and the maximum is 0.5%. When the range is ≥ 5kPa, the typical is 0.1%, and the maximum is 0.25%
Note: When measuring liquids, the maximum range is 200kPa