ZP3100 Diffuse silicon absolute pressure/pressure transmitter (non isolated type)Detailed product description：

Product Introduction
Measurement medium: non corrosive, dust-free, dry gas
Standard range: 0-1kPa --0-700kPa
Overload pressure: refer to the selection table
Output signal: 4-20mADC (two-wire system)
0-10 mADC or 0-5VDC (three wire system)
Working voltage: 14-36VDC (two-wire system); 12-36VDC (three wire system)
Standard 24VDC ± 5%, ripple less than 1%
Environmental temperature: -25 ℃~85 ℃
Storage temperature: -40 ℃~105 ℃
Load resistance: 4-20mA, (U-14)/0.02-RD, where U is the power supply voltage and RD is the internal resistance of the cable
0～10 mA，R≤1 KΩ
0～5V，R≥330Ω

Technical specifications of ZP3100 diffusion silicon absolute pressure/pressure transmitter (non isolated type) product

Accuracy: ± 0.25% (range>2.5kPa, typical value; Including nonlinearity, hysteresis, and repeatability
± 0.5% (range ≤ 2.5kPa, typical value; Including nonlinearity, hysteresis, and repeatability
Zero point migration: maximum positive migration value: the difference between the maximum range and the minimum range
Maximum negative transfer value: maximum range
Zero point adjustment: ± 20% of output range
Range adjustment: ± 20% of the output range
Overvoltage impact: not exceeding 0.5% of the maximum range
Power supply impact: less than 0.01%/V of the output range
Load impact: negligible
Temperature effect: ± 1.5% of the maximum range (>2.5kPa; including the total temperature effect at zero and range)
± 3.0% of the maximum range (≤ 2.5 kPa; including the total temperature effect of zero and range)
Stability: ± 0.25%/year of maximum range (>2.5kPa; typical value)
± 0.5%/year of maximum range (≤ 2.5kPa; typical value)