DBS500 series immersion type liquid level transmitterDetailed product description：

The DBS500 series input static pressure level transmitter is based on the principle that the measured liquid static pressure is proportional to the height of the liquid. It uses the piezoresistive effect of diffused silicon or ceramic sensitive elements to convert static pressure into electrical signals. After temperature compensation and linear correction. Convert to 4-20mADC standard current signal output.

The sensor part of the DBS500 series input static pressure level transmitter can be directly inserted into the liquid, and the transmitter part can be fixed with flanges or brackets, making installation and use extremely convenient.

Characteristics
Good stability and high accuracy
Directly put into the tested medium, installation and use are quite convenient.
Solid state structure, no movable parts, high reliability, long service life. High precision measurement can be carried out from water, oil to viscous paste,
Not affected by foaming, deposition, or electrical characteristics of the tested medium
Wide range temperature compensation.
It has power reverse polarity protection and overload current limiting protection.

Main technical indicators
Measurement range: 0.3-100m (optional by the user)
Accuracy: 0.2, 0.5, 1.0 levels
Working temperature: -20~80 ℃
Output signal: 2-wire 4-20mADC
Power supply voltage: standard 24VDC (12-36VDC)
Non sensitive area: ≤± 1.0% FS
Load capacity: 0-600 Ω
Relative temperature: ≤ 85%
Protection level: IP68
Explosion proof mark: Exia Ⅱ CT4-6

Selection Table

Type spectrum

Explanation

DBS50

Input type static pressure liquid level transmitter

Class quality

one

Cable type

two

Rod type (sensor installed at the bottom, directly in contact with liquid medium)

three

Anti-corrosion type

four

Pressure rod type (sensor installed on the upper part, not in direct contact with the medium)

Process connection form

T

bracket installation

N

Flange installation DN40 PN1.0

Y

Special Agreement

Sensor connection material

one

three hundred and four

Rod style

two

three hundred and sixteen

three

316L

four

Nitrile rubber and polyvinyl chloride composite

Cable type

five

Polytetrafluoroethylene (polypropylene flange)

Explosion proof method

O

non-explosion-proof

E

Intrinsic safety explosion-proof Exia Ⅱ CT6

display mode

O

Without on-site instructions

Z

Equipped with ammeter indication (0-100% scale)

X

Equipped with LCD digital display

Weight distribution situation

O

No need for counterweight

W

Need to balance weight

-□

Installation height (mm)

-□

Measurement height (mm)

-□

Density of the tested medium (g/cm3)