1011 Input type liquid level transmitterDetailed product description：

The 1011 input type liquid level gauge transmitter adopts imported high-precision and high stability diffusion silicon pressure sensitive chips. Through precision analog amplification circuits, the liquid level signal of the measured liquid is converted into 4-20mA DC standard signals or 0-10V, 0-5V, 1-5V, 1-10V or Modbus RTU communication protocol (Modbus serial RS485) signals. High quality transmission
Sensors, exquisite packaging technology, and sophisticated assembly processes ensure the excellent performance of this product.

The 1011 immersion type liquid level transmitter is equipped with a liquid isolation diaphragm made of 316L stainless steel, which can resist the erosion of various corrosive liquids, ensuring customers can use it with peace of mind.  

Scope of application

Industrial field liquid level measurement and control	Ships and Navigation Systems
Hydrological measurement and monitoring	Urban and water supply system
Reservoir dam water level measurement	Circulating water and sewage treatment system
Fire water tank foam water tank	Secondary water supply in the community

Technical and structural indicators

Accuracy	± 0.2% FS. Optional ± 0.1% FS
power supply	15-36V DC (usually 24VDC)
Total power consumption	≤5W
output signal	4-20mA DC equivalent current, voltage signal or digital communication protocol
Load characteristics	750 Ω (when powered by 24V DC two-wire system 4-20mA)
Electrical Characteristics	Two wire system/three wire system/four wire system optional
Operating Temperature	-10℃～+80℃
Working condition requirements	Open containers (such as pools, open sinks, etc.)
measurement range	0-0.3m～600m
overload capacity	200% FS.
Protection Rating	IP68
Diaphragm material	316L stainless steel (ceramic membrane can be specially ordered)
Shell material	316L stainless steel (PTFE shell can be specially ordered)
Wire material	Polytetrafluoroethylene (PTFE)
special signal	Output three wire DC signals such as 0-10V, 0-5V, 1-10V, and 1-5V

Selection (Simply select each item from top to bottom to obtain the default water density for the complete model, please specify other densities)

one thousand and eleven	Static pressure input type liquid level gauge liquid level transmitter
	code	Output signal and electrical circuit
	A1	Output 4-20mA DC two-wire system
	A2	Output 1-5V DC three wire system
	A3	Output 0-5V DC three wire system
	A4	Output 0-10V DC three wire system
	A5	Output 1-10V DC three wire system
	A6	Equipped with Modbus RTU communication protocol (Modbus serial RS485)
		code	measurement range			unit	Code examples
		C____	Fill in the range on the horizontal line			rice	Requires 5-meter range, code should be C5
			code	product grade
			K1	Standard Type
			K2	Explosion proof intrinsic safety type
				code	cable length		unit	Code examples
				D____	Fill in the cable length on the horizontal line		rice	An 8-meter cable is required, and the code should be D8
1011 A1 C6 K1 D10 4-20mA, measuring 6-meter water, ordinary type, cable selection example for 10 meters

Electrical connection diagram (in the measurement circuit, follow the wiring diagram below)

Main dimensions