DBS300 type screw in ceramic liquid level transmitterDetailed product description：

The DBS300 pressure (liquid level) transmitter is a deformed product in the DBS series. Can be equipped with on-site indicators or without on-site indicators. There are two types of process connection forms: G1 1/2 and G2 external thread.

This transmitter has high accuracy, good long-term stability, wide operating temperature range, strong overload resistance, small size, flat diaphragm structure, no accumulation of materials, and no blockage
Easy to clean and convenient to install. Widely used in various industries for measuring the pressure of viscous liquids, gases, and vapors, especially suitable for industries such as medicine, hygiene, and food
Pressure measurement.

Main technical specifications of DBS300 rotary ceramic liquid level transmitter

measurement range
Maximum relative pressure measurement range 0-40MPa
Minimum measurement range 0-1KPa
Absolute pressure maximum measurement range 0-40MPa
Minimum measurement range 0-1KPa
Maximum measurement range of negative relative pressure -1~2.4MPa
Minimum measurement range -1KPa to 1KPa

Selection Table for DBS300 Screw in Ceramic Liquid Level Transmitter

DBS300-	□	□	□	□	□	□	□	□	Code Description
Transmitter class	G								Standard Type
	B								Intrinsic safety type
Process connection materials		one							1Cr18Ni9Ti
		two							Special requirements agreed upon
Process connectors			G1						External thread G1 1/2
			G2						External thread G2
sealing material				F					fluororubber
				P					Fluorosilicone Rubber
				Y					Special requirements agreed upon
output signal					0				0-20mADC
					four				4-20mADC
On site display table						N			No on-site display table
						A			There is an on-site display table
accuracy class							two		0.25 level
							five		Level 0.5
Measurement range (written directly without scalar range), written directly when measuring liquid level Clear range (m), specific gravity (kg/cm3)								X	Refer to the range code table