Product Features

Imported Swiss Baumer electric ultrasonic transducer
The on-site transmitter, equipped with patented sound wave intelligent technology, micro energy technology, digital filtering technology, and temperature compensation technology, effectively ensures the accurate level measurement of GUL10 ultrasonic level gauge.  
The patented sound wave intelligent technology software can perform intelligent echo analysis without any debugging or other special steps. This technology has the functions of dynamic thinking and dynamic analysis. The patented sound wave intelligent technology can avoid various sound wave interferences, automatically filter out various multiple echoes, false echoes, and industrial noise. Even if weak real echo signals are submerged in strong noise and there are false echo conditions such as container obstacle echoes, side wall echoes, and multiple echoes, the sound wave intelligent technology can directly extract the real echo signals during the process of receiving echo signals. Therefore, it ensures the reliability of the measurement and higher accuracy.  
A transducer with strong emission power and a self-cleaning surface.  
Integrated design (three wire system) with a compact and beautiful appearance, easy to install.  
The split design is suitable for installation in situations where it is difficult to observe

Technical parameters
Working frequency: 46KHz: GU601
37KHz:GU602 
23KHz:GU603 
Beam angle:<6 °
Maximum range: 4m: GU601
8m (liquid): GU602
15m (liquid): 5m (solid) GU603
15m (liquid): GU603
Over 15 meters (split) GU604
Blind spot: 0.25m: GU601
0.4m:GU602 
0.6m:GU603 
Maximum response speed: 3.6m/min
Output signal: 4-20mA (optional 232 or 485)
Control output:
Integrated: Programmable 1 set of 2 relays
Wall mounted split type: 2 sets of 4-channel relays with programmable outputs (2 high and 2 low)
Transmission distance:
Nearby type ≤ 30m (using cable TV RF cable, manufacturer's standard wiring of 3 meters)
Remote transmission type ≤ 30mm (four wire system: any wire can be used as long as it meets mechanical strength requirements)
Maximum load impedance: 500 Ω, 250 Ω (intrinsic safety type)
Minimum display resolution: 1mm
Accuracy: (maximum range) ± 3mm or 0.25%/0.5%
Environmental temperature: -40 ℃ to+70 ℃
Work pressure: (absolute pressure) 0.1MPa
Supply voltage: 24VDC or 220VAC
Power consumption:<2.0W
On site display: 4-digit LCD display
Outer diameter of incoming cable: 7-10mm
Main body shell: ABS engineering plastic
Protection level: (main body shell) IP65
Protection level: (transducer) IP66: GU601, GU602, GU603
IP68: Split type
Explosion proof grade: Exd (ia) IIBT4
Installation connection method: threaded connection M66 * 2
Flange connection: according to customer requirements
Converter housing: PC-ABS
PVC 
PTFE 

Selection Tips
To purchase an integrated ultrasonic level gauge, the following parameters need to be determined in detail: measuring medium, temperature, pressure, range, connection method (flange or thread), and power supply.

Installation Diagram