DBF-A- III vector flange type liquid level transmitterDetailed product description：

DBF vector liquid level transmitter is mainly used for detection in automatic regulation systems. It can continuously measure the pressure difference of viscous, corrosive, precipitating, and crystalline fluids, as well as the liquid level of open or pressurized containers. It can also measure the flow rate of liquids, gases, and vapors when combined with throttling devices and square openers.

Main technical indicators
Basic type
Output current: 4-20mADC
Load resistance:
0～250Ω
(The wiring resistance is not greater than 100 Ω)
Sensitivity: 0.1%
Basic error: ± 1%
Round trip deterioration: 1%
Work pressure: 6.4MPa
Work pressure error: ≤± 3%
Working conditions:
Environmental temperature: -25 ℃~+60 ℃
Relative humidity: ≤ 95%
Working vibration: frequency ≤ 10~55Hz
Amplitude ≤ 0.15mm (bidirectional)
Power supply: DC24V ± 5%
Power consumption: ≤ 6W
Structural form: on-site installation type
Negative capacity chamber pipe joint thread: M18 × 1.5
Intrinsic safety explosion-proof mark: ib Ⅱ BT4
Explosion proof mark: Exd Ⅰ/Ⅱ BT4

Model

model	Adjustable range MPa	Basic error%
DBF1-311A-Ⅲ	0～5kPa...0～20kPa	±1
DBF1-312A-Ⅲ	0～15kPa...0～60kPa	±1
DBF1-321A-Ⅲ	0～60kPa...0～250kPa	±1
DBF2-311A-Ⅲ	0～5kPa...0～200kPa	±1
DBF2-312A-Ⅲ	0～15kPa...0～60kPa	±1

DBF-A-III vector flange liquid level transmitter