The DPSH-A series liquid level transmitter is widely used in institutions such as petroleum, marine, reservoir, metallurgy, power, and scientific research. It uses a wide range of measured media and can measure oil, water, and paste materials compatible with 316 stainless steel. It has a certain anti-corrosion ability, a direct input structure, easy installation and use, and can adapt to very small installation spaces.

DPSH-A series liquid level transmitter 4-20ADC standard current signal output, operates in a two-wire system, and the pressure sensor directly senses the measured liquid level pressure without being affected by medium foaming or deposition.

Technical specifications of DPSH-A series liquid level transmitter

1. Applicable medium: liquid and semi paste
2. Range: 0-0.3-500M
3. Accuracy: 0.1% F.S (intelligent type); 0.25%F.S; 0.5%FS
4. Operating voltage: 24V DC; 220V.AC
5. Operating temperature: 20 ℃ -80 ℃
6. Connection process: immersion type: direct support hole spacing of 50 × 50mm, hole diameter of Φ 5mm
Straight rod type: no thread or thread optional
Anti corrosion type: The hole spacing of the right angle bracket is 50 × 50mm, and the hole diameter is Φ 5mm

7. Load capacity

DPSH-A series liquid level transmitter