E-mag Electromagnetic flowmeterDetailed product description：

The measurement principle of E-mag electromagnetic flowmeter is based on Faraday's law of electromagnetic induction, which is used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. It is applied in industries such as chemical, power, metallurgy, water supply and drainage, papermaking, medicine, and food. As a large backbone enterprise in the domestic instrumentation industry, we have nearly forty years of experience in designing and manufacturing electromagnetic flowmeters (1967), and have introduced five generations of electromagnetic flowmeter manufacturing technology from ABB.

Measurement is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity
Low frequency or multi frequency square wave excitation, low power consumption, zero point stability, and superior low flow rate characteristics
Can be measured bidirectionally, with bidirectional current and bidirectional pulse
Multiple flow displays, air traffic control detection, and automatic process diagnosis
Strong anti-interference ability, EMC (electromagnetic compatibility) index meets BS6667 and EN50081-1 standards
Long service life, with a fault free operation time of 20000 hours
Protection level up to IP68, underwater immersion of 10 meters
Multiple communication methods, with communication interface configurations including RS232, RS485, HART, Profibus DP, and Profibus PA

E-mag electromagnetic flowmeter model: E-mag, E-mag, E-mag, C, E-mag, X
Installation form: integrated or separated type
Nominal diameter: DN15- DN3000
Accuracy: ± 0.2% ± 0.3% ± 0.5%
Range: 1500:1
Nominal pressure: 0.6MPa -4.0MPa
Protection level: IP65, IP67, IP68
Explosion proof signs: MdIIBT4, EExemd [ib] IICT3... T6
Menu language: English, Chinese
Applicable power supply: 85-265V.AC 11-40V.DC