ANB series Anuba flowmeter

1. Specification: DN50-DN5000 (mm); Insertion type: DN500-DN5000 (mm);
2. Measurement accuracy: ± 1.0% FS; repeatability: ± 0.1%;
3. Range: Volume flow rate: 10:1; Quality flow rate: 8:1;
4. Work pressure: The average speed tube is not functioning properly. Type: ≤ 20MPa;
Adjustable type of averaging tube: ≤ 10MPa;
5. Fluid temperature: ≤ 450 ℃;
6. Medium viscosity: ≤ 30CP (equivalent to heavy oil);
7. Material:
Uniform speed tube, three valve group: various grades of stainless steel (optional);
Main pipe and flange: stainless steel or carbon steel (optional);

Performance characteristics
High accuracy and good stability, with a long-term accuracy of ± 1% and stability of ± 0.1%; Lightweight, easy to install and disassemble, ANB-35、 Type 45 can be installed and maintained without stopping production; Beneficial for pipeline layout, the installation position of the Anuba flowmeter only requires twice the length of the straight pipe before and after; The pressure loss is small and the energy loss is low. The permanent pressure loss of Anuba only accounts for 2-15% of the differential pressure.

Comparison of Specification, Model and Parameters of ANB Series Annubar Flow Meter