MYD Hydraulic actuatorDetailed product description：

MYD hydraulic actuator is a new type of precision hydraulic actuator, suitable for the control part of rotary valves such as ball valves, butterfly valves, plug valves, etc. with a diameter of DN100 or less.

The MYD hydraulic actuator limits the rotation angle of the positioning block by adjusting the screw, thus playing a role in adjusting the angle. By screwing in two adjustment screws to different depths, the opening and closing angles of the actuator can be adjusted freely from 0-90 ° (± 5 °). Thus solving the defect of the actuator being unable to adjust bidirectionally. Improve existing hydraulic actuators, which are now derived from pneumatic actuators. The AW type pneumatic actuator, due to its large volume, evolved into a hydraulic actuator, which is bulky and cumbersome. Multiple rods are used to fix the oil cylinder to the housing, which cannot withstand too high oil pressure, resulting in the actuator only working at low oil pressure (0-5Mpa). The newly improved hydraulic actuator adopts the integral casting of oil cylinder and housing, and the piston is also machined from a whole bar material, greatly increasing the pressure resistance of the actuator. The actual pressure of the oil cylinder can reach 25Mpa, which can achieve small actuator volume and large output torque. It is suitable for situations where on-site installation space is limited and the load is high.