BL-100 Electronic soap film flowmeterDetailed product description：

The BL-100 electronic soap film flowmeter is suitable for detecting the flow rate of any gas or liquid, and is widely used in the calibration of various laboratory gas flow rates, including flow calibration of atmospheric samplers, dust samplers, glass rotor flowmeters, and flow measurement of various chromatographs.  

The BL series electronic soap film flowmeter combines its internal circuit control unit with sensitive components to measure gas flow rate, and its accuracy is much better than using eye and hand stopwatches to measure gas flow rate. It is the best choice to replace handheld soap film tubes with stopwatches. This series of electronic soap film flow meters has a LCD display with temperature, pressure, and volume calibration functions. Users can obtain the volumetric flow rate of the measured gas through on-site self calibration, and can measure the gas flow rate in a single measurement or take the average value after ten flow rate measurements.
Technical parameters:
Measurement range: 0.1mL~100mL/min
Measurement accuracy: △ Q ＜ ± 1%.
Measurement method: wet type
Time range: 0.1-1200.0s (internal calculation accurate to 0.01 seconds).
Equipped with a rechargeable battery with a nominal value of 8.4V and 1200mA/h, the standby time after fully charged is greater than 300 hours. Charging times>500 times.
Operating environment: 0-50 ℃; 0-70% RH (no condensation)
Weight: Approximately 950 grams
Instrument configuration:

Standard configuration of BL-100 digital soap film flowmeter:
charger
Instruction Manual
Certificate of Conformity
silicone tube